protection

dvids

us national archives

nasa

kennedy space center

customs

personnel

inspections, protection

365 media by topic ∙ page 1 of 4
KENNEDY SPACE CENTER, FLA. - STS-114 Mission Specialist Soichi Noguchi is helped by the Closeout Crew with his launch and entry suit before entering Space Shuttle Discovery. This is Noguchi’s first Shuttle flight. He represents the Japan Aerospace Exploration Agency. The Return to Flight mission to the International Space Station carries the External Stowage Platform-2, equipped with spare part assemblies, and a replacement Control Moment Gyroscope contained in the Lightweight Multi-Purpose Experiment Support Structure and Multi-Purpose Logistics Module Raffaello, housing 15 tons of hardware and supplies that will be transferred to the Station after the Shuttle docks to the complex . On this mission, the crew will perform inspections on-orbit for the first time of all of the Reinforced Carbon-Carbon (RCC) panels on the leading edge of the wings and the Thermal Protection System tiles using the new Canadian-built Orbiter Boom Sensor System and the data from 176 impact and temperature sensors. Mission Specialists will also practice repair techniques on RCC and tile samples during a spacewalk in the payload bay. KSC-05pp1797

KENNEDY SPACE CENTER, FLA. - STS-114 Mission Specialist Soichi Noguch...

KENNEDY SPACE CENTER, FLA. - STS-114 Mission Specialist Soichi Noguchi is helped by the Closeout Crew with his launch and entry suit before entering Space Shuttle Discovery. This is Noguchi’s first Shuttle fl... More

KENNEDY SPACE CENTER, FLA. - Viewed from a camera in the midst of Florida greenery across the marshy water, Space Shuttle Discovery leaps through billows of smoke and steam on Launch Pad 39B on the historic Return to Flight mission STS-114. Liftoff occurred at 10:39 a.m. EDT. This is the 114th Space Shuttle flight and the 31st for Discovery. The 12-day mission is expected to end with touchdown at the Shuttle Landing Facility on Aug. 7. On this mission to the International Space Station the crew will perform inspections on-orbit for the first time of all of the Reinforced Carbon-Carbon (RCC) panels on the leading edge of the wings and the Thermal Protection System tiles using the new Canadian-built Orbiter Boom Sensor System and the data from 176 impact and temperature sensors. Mission Specialists will also practice repair techniques on RCC and tile samples during a spacewalk in the payload bay. During two additional spacewalks, the crew will install the External Stowage Platform-2, equipped with spare part assemblies, and a replacement Control Moment Gyroscope contained in the Lightweight Multi-Purpose Experiment Support Structure. KSC-05pp1779

KENNEDY SPACE CENTER, FLA. - Viewed from a camera in the midst of Fl...

KENNEDY SPACE CENTER, FLA. - Viewed from a camera in the midst of Florida greenery across the marshy water, Space Shuttle Discovery leaps through billows of smoke and steam on Launch Pad 39B on the historic R... More

KENNEDY SPACE CENTER, FLA. - STS-114 Mission Specialist Stephen Robinson is helped by the Closeout Crew with his launch and entry suit before entering Space Shuttle Discovery. The Return to Flight mission to the International Space Station carries the External Stowage Platform-2, equipped with spare part assemblies, and a replacement Control Moment Gyroscope contained in the Lightweight Multi-Purpose Experiment Support Structure and Multi-Purpose Logistics Module Raffaello, housing 15 tons of hardware and supplies that will be transferred to the Station after the Shuttle docks to the complex . On this mission, the crew will perform inspections on-orbit for the first time of all of the Reinforced Carbon-Carbon (RCC) panels on the leading edge of the wings and the Thermal Protection System tiles using the new Canadian-built Orbiter Boom Sensor System and the data from 176 impact and temperature sensors. Mission Specialists will also practice repair techniques on RCC and tile samples during a spacewalk in the payload bay. KSC-05pp1799

KENNEDY SPACE CENTER, FLA. - STS-114 Mission Specialist Stephen Robin...

KENNEDY SPACE CENTER, FLA. - STS-114 Mission Specialist Stephen Robinson is helped by the Closeout Crew with his launch and entry suit before entering Space Shuttle Discovery. The Return to Flight mission to ... More

KENNEDY SPACE CENTER, FLA. -- The Shuttle Carrier Aircraft rolls to a stop with its piggyback cargo orbiter Atlantis at the Shuttle Landing Facility. In the background is the Vehicle Assembly Building. Atlantis returns home after a 10-month stay in the Palmdale, CA, orbiter processing facility undergoing extensive inspections and modifications. They included several upgrades enabling it to support International Space Station missions, such as adding an external airlock for ISS docking missions and installing thinner, lighter thermal protection blankets for weight reduction which will allow it to haul heavier cargo. The flight from Palmdale included a fueling stop in Ft. Hood, TX, and overnight stay at Ft. Campbell, KY. Atlantis will undergo preparations in the Orbiter Processing Facility at KSC for its planned flight in June 1999 KSC-98pc1162

KENNEDY SPACE CENTER, FLA. -- The Shuttle Carrier Aircraft rolls to a ...

KENNEDY SPACE CENTER, FLA. -- The Shuttle Carrier Aircraft rolls to a stop with its piggyback cargo orbiter Atlantis at the Shuttle Landing Facility. In the background is the Vehicle Assembly Building. Atlantis... More

KENNEDY SPACE CENTER, FLA. -- The Shuttle Carrier Aircraft gently lands its piggyback cargo orbiter Atlantis at the Shuttle Landing Facility. Atlantis returns home after a 10-month stay in the Palmdale, CA, orbiter processing facility undergoing extensive inspections and modifications. They included several upgrades enabling it to support International Space Station missions, such as adding an external airlock for ISS docking missions and installing thinner, lighter thermal protection blankets for weight reduction which will allow it to haul heavier cargo. The flight from Palmdale included a fueling stop in Ft. Hood, TX, and overnight stay at Ft. Campbell, KY. Atlantis will undergo preparations in the Orbiter Processing Facility at KSC for its planned flight in June 1999 KSC-98pc1161

KENNEDY SPACE CENTER, FLA. -- The Shuttle Carrier Aircraft gently land...

KENNEDY SPACE CENTER, FLA. -- The Shuttle Carrier Aircraft gently lands its piggyback cargo orbiter Atlantis at the Shuttle Landing Facility. Atlantis returns home after a 10-month stay in the Palmdale, CA, orb... More

KENNEDY SPACE CENTER, FLA. -- Stairs are rolled to the forward opening of the Shuttle Carrier Aircraft with its piggyback cargo, the orbiter Atlantis after it rolls to a stop at the Shuttle Landing Facility. Atlantis returns home after a 10-month stay in the Palmdale, CA, orbiter processing facility undergoing extensive inspections and modifications. They included several upgrades enabling it to support International Space Station missions, such as adding an external airlock for ISS docking missions and installing thinner, lighter thermal protection blankets for weight reduction which will allow it to haul heavier cargo. The flight from Palmdale included a fueling stop in Ft. Hood, TX, and overnight stay at Ft. Campbell, KY. Atlantis will undergo preparations in the Orbiter Processing Facility at KSC for its planned flight in June 1999 KSC-98pc1163

KENNEDY SPACE CENTER, FLA. -- Stairs are rolled to the forward opening...

KENNEDY SPACE CENTER, FLA. -- Stairs are rolled to the forward opening of the Shuttle Carrier Aircraft with its piggyback cargo, the orbiter Atlantis after it rolls to a stop at the Shuttle Landing Facility. At... More

KENNEDY SPACE CENTER, FLA. -- The Shuttle Carrier Aircraft with orbiter Atlantis on top arrives at the Shuttle Landing Facility. Atlantis returns home after a 10-month stay in the Palmdale, CA, orbiter processing facility undergoing extensive inspections and modifications. They included several upgrades enabling it to support International Space Station missions, such as adding an external airlock for ISS docking missions and installing thinner, lighter thermal protection blankets for weight reduction which will allow it to haul heavier cargo. The flight from Palmdale included a fueling stop in Ft. Hood, TX, and overnight stay at Ft. Campbell, KY. Atlantis will undergo preparations in the Orbiter Processing Facility at KSC for its planned flight in June 1999 KSC-98pc1159

KENNEDY SPACE CENTER, FLA. -- The Shuttle Carrier Aircraft with orbite...

KENNEDY SPACE CENTER, FLA. -- The Shuttle Carrier Aircraft with orbiter Atlantis on top arrives at the Shuttle Landing Facility. Atlantis returns home after a 10-month stay in the Palmdale, CA, orbiter processi... More

KENNEDY SPACE CENTER, FLA. -- The Shuttle Carrier Aircraft with orbiter Atlantis on top touches down at the Shuttle Landing Facility. Atlantis returns home after a 10-month stay in the Palmdale, CA, orbiter processing facility undergoing extensive inspections and modifications. They included several upgrades enabling it to support International Space Station missions, such as adding an external airlock for ISS docking missions and installing thinner, lighter thermal protection blankets for weight reduction which will allow it to haul heavier cargo. The flight from Palmdale included a fueling stop in Ft. Hood, TX, and overnight stay at Ft. Campbell, KY. Atlantis will undergo preparations in the Orbiter Processing Facility at KSC for its planned flight in June 1999 KSC-98pc1160

KENNEDY SPACE CENTER, FLA. -- The Shuttle Carrier Aircraft with orbite...

KENNEDY SPACE CENTER, FLA. -- The Shuttle Carrier Aircraft with orbiter Atlantis on top touches down at the Shuttle Landing Facility. Atlantis returns home after a 10-month stay in the Palmdale, CA, orbiter pro... More

Seen from behind, the orbiter Atlantis moves into the Orbiter Processing Facility 2 (OPF-2) where it will undergo preparations for its planned flight in June 1999. Atlantis spent 10 months in Palmdale, CA, undergoing extensive inspections and modifications in the orbiter processing facility there. The modifications included several upgrades enabling it to support International Space Station missions, such as adding an external airlock for ISS docking missions and installing thinner, lighter thermal protection blankets for weight reduction which will allow it to haul heavier cargo. OPF-2 consists of two 2,700-square-meter (29,000 square feet) high bays. It measures 29 meters (95 ft). high, 121 meters (397 ft) long and 71 meters (233 ft) wide KSC-98pc1168

Seen from behind, the orbiter Atlantis moves into the Orbiter Processi...

Seen from behind, the orbiter Atlantis moves into the Orbiter Processing Facility 2 (OPF-2) where it will undergo preparations for its planned flight in June 1999. Atlantis spent 10 months in Palmdale, CA, unde... More

The orbiter Atlantis, being towed from the Shuttle Landing Facility toward the Vehicle Assembly Building (VAB) , intersects the morning sun's rays. In the background, to the right of the VAB, are the Orbiter Processing Facility 1 and 2. Atlantis spent 10 months in Palmdale, CA, undergoing extensive inspections and modifications in the orbiter processing facility there. The modifications included several upgrades enabling it to support International Space Station missions, such as adding an external airlock for ISS docking missions and installing thinner, lighter thermal protection blankets for weight reduction which will allow it to haul heavier cargo. Atlantis will undergo preparations at KSC in Orbiter Processing Facility 2 for its planned flight in June 1999 KSC-98pc1166

The orbiter Atlantis, being towed from the Shuttle Landing Facility to...

The orbiter Atlantis, being towed from the Shuttle Landing Facility toward the Vehicle Assembly Building (VAB) , intersects the morning sun's rays. In the background, to the right of the VAB, are the Orbiter Pr... More

The orbiter Atlantis is towed away from the Shuttle Landing Facility after returning home from California atop its Shuttle Carrier Aircraft. The orbiter spent 10 months in Palmdale undergoing extensive inspections and modifications in the orbiter processing facility there. The modifications included several upgrades enabling it to support International Space Station missions, such as adding an external airlock for ISS docking missions and installing thinner, lighter thermal protection blankets for weight reduction which will allow it to haul heavier cargo. Atlantis will undergo preparations in the Orbiter Processing Facility at KSC for its planned flight in June 1999 KSC-98pc1164

The orbiter Atlantis is towed away from the Shuttle Landing Facility a...

The orbiter Atlantis is towed away from the Shuttle Landing Facility after returning home from California atop its Shuttle Carrier Aircraft. The orbiter spent 10 months in Palmdale undergoing extensive inspecti... More

Seen from behind, the orbiter Atlantis approaches the entrance of Orbiter Processing Facility 2 (OPF-2) where it will undergo preparations for its planned flight in June 1999. Atlantis spent 10 months in Palmdale, CA, undergoing extensive inspections and modifications in the orbiter processing facility there. The modifications included several upgrades enabling it to support International Space Station missions, such as adding an external airlock for ISS docking missions and installing thinner, lighter thermal protection blankets for weight reduction which will allow it to haul heavier cargo. OPF-2 consists of a 2,700-square-meter (29,000 square ft.) high bay. The building measures 29 meters (95 ft). high, 121 meters (397 ft.) long and 71 meters (233 ft.) wide KSC-98pc1167

Seen from behind, the orbiter Atlantis approaches the entrance of Orbi...

Seen from behind, the orbiter Atlantis approaches the entrance of Orbiter Processing Facility 2 (OPF-2) where it will undergo preparations for its planned flight in June 1999. Atlantis spent 10 months in Palmda... More

The orbiter Atlantis, being towed from the Shuttle Landing Facility, is reflected in waters from the Banana Creek next to the towway. The orbiter spent 10 months in Palmdale, CA, undergoing extensive inspections and modifications in the orbiter processing facility there. The modifications included several upgrades enabling it to support International Space Station missions, such as adding an external airlock for ISS docking missions and installing thinner, lighter thermal protection blankets for weight reduction which will allow it to haul heavier cargo. Atlantis will undergo preparations in the Orbiter Processing Facility at KSC for its planned flight in June 1999 KSC-98pc1165

The orbiter Atlantis, being towed from the Shuttle Landing Facility, i...

The orbiter Atlantis, being towed from the Shuttle Landing Facility, is reflected in waters from the Banana Creek next to the towway. The orbiter spent 10 months in Palmdale, CA, undergoing extensive inspection... More

KENNEDY SPACE CENTER, FLA. -- Proper Wiring Protection: The cables closest to the heads of the screws in this photo are properly protected from abrasion. During launch of Columbia on mission STS-93, a wire damaged from abrasion caused a short circuit in two separate main engine controllers. As a result of the findings, Shuttle program managers decided to conduct inspections of the wiring in Endeavour's payload bay before its next mission, STS-99. The inspection and possible repair work will lead to a delayed launch date no earlier than Oct.7. The primary payload of the mission is the Shuttle Radar Topography Mission, a specially modified radar system that will gather data for the most accurate and complete topographic map of the Earth's surface that has ever been assembled KSC-99pd-812-02

KENNEDY SPACE CENTER, FLA. -- Proper Wiring Protection: The cables clo...

KENNEDY SPACE CENTER, FLA. -- Proper Wiring Protection: The cables closest to the heads of the screws in this photo are properly protected from abrasion. During launch of Columbia on mission STS-93, a wire dama... More

KENNEDY SPACE CENTER, FLA. -- Space Shuttle Columbia, atop its Mobile Launcher Platform, sits on Launch Pad 39A after an early morning rollout from the Vehicle Assembly Building. On the left is the Rotating Service Structure, which will swing counterclockwise to enclose the Shuttle and enable final preparations, including transfer of the payload. Atop the Fixed Service Structure (center) is the lightning mast, 347 feet above the pad. The 80-foot fiberglass mast provides protection from lightning strikes. Columbia is scheduled to be launched Feb. 28 on mission STS-109, a Hubble Servicing Mission. The goal of the mission is to replace Solar Array 2 with Solar Array 3, replace the Power Control Unit, remove the Faint Object Camera and install the ACS, install the Near Infrared Camera and Multi-Object Spectrometer (NICMOS) Cooling System, and install New Outer Blanket Layer insulation. The launch will be the first for Columbia after returning from California where it underwent extensive maintenance, inspections and enhancements. More than 100 upgrades make Columbia safer and more reliable than ever before KSC-02pd0049

KENNEDY SPACE CENTER, FLA. -- Space Shuttle Columbia, atop its Mobile ...

KENNEDY SPACE CENTER, FLA. -- Space Shuttle Columbia, atop its Mobile Launcher Platform, sits on Launch Pad 39A after an early morning rollout from the Vehicle Assembly Building. On the left is the Rotating Se... More

US Air Force (USAF) STAFF Sergeant (SSGT) Mike Macbrayne, with the 48th Civil Engineer Squadron (CES), a fire protection specialist at Royal Air Force Lakenheath, England, inspects a fire truck during morning inspections

US Air Force (USAF) STAFF Sergeant (SSGT) Mike Macbrayne, with the 48t...

The original finding aid described this photograph as: Base: RAF Lakenheath State: East Anglia Country: England / Great Britain (ENG) Scene Major Command Shown: USAFE Scene Camera Operator: SRA James Harpe... More

KENNEDY SPACE CENTER, FLA. - Clouds of smoke and steam billow around Space Shuttle Discovery as it leaps off Launch Pad 39B on the historic Return to Flight mission STS-114. Liftoff occurred at 10:39 a.m. EDT. It is the 114th Space Shuttle flight and the 31st for Discovery. The 12-day mission is expected to end with touchdown at the Shuttle Landing Facility on Aug. 7. On this mission to the International Space Station the crew will perform inspections on-orbit for the first time of all of the Reinforced Carbon-Carbon (RCC) panels on the leading edge of the wings and the Thermal Protection System tiles using the new Canadian-built Orbiter Boom Sensor System and the data from 176 impact and temperature sensors. Mission Specialists will also practice repair techniques on RCC and tile samples during a spacewalk in the payload bay. During two additional spacewalks, the crew will install the External Stowage Platform-2, equipped with spare part assemblies, and a replacement Control Moment Gyroscope contained in the Lightweight Multi-Purpose Experiment Support Structure. KSC-05pp1775

KENNEDY SPACE CENTER, FLA. - Clouds of smoke and steam billow around S...

KENNEDY SPACE CENTER, FLA. - Clouds of smoke and steam billow around Space Shuttle Discovery as it leaps off Launch Pad 39B on the historic Return to Flight mission STS-114. Liftoff occurred at 10:39 a.m. EDT.... More

KENNEDY SPACE CENTER, FLA. - The flames of Space Shuttle Discovery’s Solid Rocket Boosters are reflected in the water next to Launch Pad 39B as the Shuttle leaps from the pad on the historic Return to Flight mission STS-114. Liftoff occurred at 10:39 a.m. EDT. It is the 114th Space Shuttle flight and the 31st for Discovery. The 12-day mission is expected to end with touchdown at the Shuttle Landing Facility on Aug. 7. On this mission to the International Space Station the crew will perform inspections on-orbit for the first time of all of the Reinforced Carbon-Carbon (RCC) panels on the leading edge of the wings and the Thermal Protection System tiles using the new Canadian-built Orbiter Boom Sensor System and the data from 176 impact and temperature sensors. Mission Specialists will also practice repair techniques on RCC and tile samples during a spacewalk in the payload bay. During two additional spacewalks, the crew will install the External Stowage Platform-2, equipped with spare part assemblies, and a replacement Control Moment Gyroscope contained in the Lightweight Multi-Purpose Experiment Support Structure. KSC-05pp1777

KENNEDY SPACE CENTER, FLA. - The flames of Space Shuttle Discovery’s ...

KENNEDY SPACE CENTER, FLA. - The flames of Space Shuttle Discovery’s Solid Rocket Boosters are reflected in the water next to Launch Pad 39B as the Shuttle leaps from the pad on the historic Return to Flight m... More

KENNEDY SPACE CENTER, FLA. -- A tracking camera on Launch Pad 39B captures a closeup of Space Shuttle Discovery moments after liftoff on the historic Return to Flight mission STS-114. The liftoff occurred at 10:39 a.m. EDT. On this mission to the International Space Station the crew will perform inspections on-orbit for the first time of all of the Reinforced Carbon-Carbon (RCC) panels on the leading edge of the wings and the Thermal Protection System tiles using the new Canadian-built Orbiter Boom Sensor System and the data from 176 impact and temperature sensors. Mission Specialists will also practice repair techniques on RCC and tile samples during a spacewalk in the payload bay. During two additional spacewalks, the crew will install the External Stowage Platform-2, equipped with spare part assemblies, and a replacement Control Moment Gyroscope contained in the Lightweight Multi-Purpose Experiment Support Structure. The 12-day mission is expected to end with touchdown at the Shuttle Landing Facility on Aug. 7. KSC-05pp1771

KENNEDY SPACE CENTER, FLA. -- A tracking camera on Launch Pad 39B capt...

KENNEDY SPACE CENTER, FLA. -- A tracking camera on Launch Pad 39B captures a closeup of Space Shuttle Discovery moments after liftoff on the historic Return to Flight mission STS-114. The liftoff occurred at 1... More

KENNEDY SPACE CENTER, FLA. - Clouds of smoke and steam roll away from Launch Pad 39B as Space Shuttle Discovery roars above the tree line into the sky. Liftoff of Discovery on the historic Return to Flight mission STS-114. occurred at 10:39 a.m. EDT. On this mission to the International Space Station the crew will perform inspections on-orbit for the first time of all of the Reinforced Carbon-Carbon (RCC) panels on the leading edge of the wings and the Thermal Protection System tiles using the new Canadian-built Orbiter Boom Sensor System and the data from 176 impact and temperature sensors. Mission Specialists will also practice repair techniques on RCC and tile samples during a spacewalk in the payload bay. During two additional spacewalks, the crew will install the External Stowage Platform-2, equipped with spare part assemblies, and a replacement Control Moment Gyroscope contained in the Lightweight Multi-Purpose Experiment Support Structure. The 12-day mission is expected to end with touchdown at the Shuttle Landing Facility on Aug. 7. (Photo Credit: Bill Ingalls) KSC-05pp1768

KENNEDY SPACE CENTER, FLA. - Clouds of smoke and steam roll away from ...

KENNEDY SPACE CENTER, FLA. - Clouds of smoke and steam roll away from Launch Pad 39B as Space Shuttle Discovery roars above the tree line into the sky. Liftoff of Discovery on the historic Return to Flight mis... More

KENNEDY SPACE CENTER, FLA. - Clouds of smoke and steam fill Launch Pad 39B as Space Shuttle Discovery roars into the sky on the historic Return to Flight mission STS-114. Liftoff occurred at 10:39 a.m. EDT. It is the 114th Space Shuttle flight and the 31st for Discovery. The 12-day mission is expected to end with touchdown at the Shuttle Landing Facility on Aug. 7. On this mission to the International Space Station the crew will perform inspections on-orbit for the first time of all of the Reinforced Carbon-Carbon (RCC) panels on the leading edge of the wings and the Thermal Protection System tiles using the new Canadian-built Orbiter Boom Sensor System and the data from 176 impact and temperature sensors. Mission Specialists will also practice repair techniques on RCC and tile samples during a spacewalk in the payload bay. During two additional spacewalks, the crew will install the External Stowage Platform-2, equipped with spare part assemblies, and a replacement Control Moment Gyroscope contained in the Lightweight Multi-Purpose Experiment Support Structure. KSC-05pp1773

KENNEDY SPACE CENTER, FLA. - Clouds of smoke and steam fill Launch Pad...

KENNEDY SPACE CENTER, FLA. - Clouds of smoke and steam fill Launch Pad 39B as Space Shuttle Discovery roars into the sky on the historic Return to Flight mission STS-114. Liftoff occurred at 10:39 a.m. EDT. I... More

KENNEDY SPACE CENTER, FLA. - As billows of smoke and steam roll away, Space Shuttle Discovery leaps from Launch Pad 39B on the historic Return to Flight mission STS-114. Liftoff occurred at 10:39 a.m. EDT. At right is the 290-foot water tower that holds the 300,000 gallons of water that flood the pad for sound suppression. This is the 114th Space Shuttle flight and the 31st for Discovery. The 12-day mission is expected to end with touchdown at the Shuttle Landing Facility on Aug. 7. On this mission to the International Space Station the crew will perform inspections on-orbit for the first time of all of the Reinforced Carbon-Carbon (RCC) panels on the leading edge of the wings and the Thermal Protection System tiles using the new Canadian-built Orbiter Boom Sensor System and the data from 176 impact and temperature sensors. Mission Specialists will also practice repair techniques on RCC and tile samples during a spacewalk in the payload bay. During two additional spacewalks, the crew will install the External Stowage Platform-2, equipped with spare part assemblies, and a replacement Control Moment Gyroscope contained in the Lightweight Multi-Purpose Experiment Support Structure. KSC-05pp1778

KENNEDY SPACE CENTER, FLA. - As billows of smoke and steam roll away,...

KENNEDY SPACE CENTER, FLA. - As billows of smoke and steam roll away, Space Shuttle Discovery leaps from Launch Pad 39B on the historic Return to Flight mission STS-114. Liftoff occurred at 10:39 a.m. EDT. At... More

KENNEDY SPACE CENTER, FLA. - In the wrong place at the wrong time, a bird (upper left) falls away from Space Shuttle Discovery after being hit by the External Tank during launch from Launch Pad 39B. Discovery lifted off into the clear blue sky at 10:39 a.m. EDT on the historic Return to Flight mission STS-114. It is the 114th Space Shuttle flight and the 31st for Discovery. The 12-day mission is expected to end with touchdown at the Shuttle Landing Facility on Aug. 7. On this mission to the International Space Station the crew will perform inspections on-orbit for the first time of all of the Reinforced Carbon-Carbon (RCC) panels on the leading edge of the wings and the Thermal Protection System tiles using the new Canadian-built Orbiter Boom Sensor System and the data from 176 impact and temperature sensors. Mission Specialists will also practice repair techniques on RCC and tile samples during a spacewalk in the payload bay. During two additional spacewalks, the crew will install the External Stowage Platform-2, equipped with spare part assemblies, and a replacement Control Moment Gyroscope contained in the Lightweight Multi-Purpose Experiment Support Structure. KSC-05pp1774

KENNEDY SPACE CENTER, FLA. - In the wrong place at the wrong time, a b...

KENNEDY SPACE CENTER, FLA. - In the wrong place at the wrong time, a bird (upper left) falls away from Space Shuttle Discovery after being hit by the External Tank during launch from Launch Pad 39B. Discovery ... More

KENNEDY SPACE CENTER, FLA. - A fish-eye view shows Space Shuttle Discovery moments after liftoff from Launch Pad 39B on the historic Return to Flight mission STS-114. At left is the Fixed Service Structure with the White Room appearing to be suspended in mid-air. The White Room provides the astronauts access into the orbiter. The liftoff occurred at 10:39 a.m. EDT. On this mission to the International Space Station the crew will perform inspections on-orbit for the first time of all of the Reinforced Carbon-Carbon (RCC) panels on the leading edge of the wings and the Thermal Protection System tiles using the new Canadian-built Orbiter Boom Sensor System and the data from 176 impact and temperature sensors. Mission Specialists will also practice repair techniques on RCC and tile samples during a spacewalk in the payload bay. During two additional spacewalks, the crew will install the External Stowage Platform-2, equipped with spare part assemblies, and a replacement Control Moment Gyroscope contained in the Lightweight Multi-Purpose Experiment Support Structure. The 12-day mission is expected to end with touchdown at the Shuttle Landing Facility on Aug. 7. KSC-05pp1772

KENNEDY SPACE CENTER, FLA. - A fish-eye view shows Space Shuttle Disco...

KENNEDY SPACE CENTER, FLA. - A fish-eye view shows Space Shuttle Discovery moments after liftoff from Launch Pad 39B on the historic Return to Flight mission STS-114. At left is the Fixed Service Structure wit... More

KENNEDY SPACE CENTER, FLA. - STS-114 Mission Commander Eileen Collins is helped by the Closeout Crew with her launch and entry suit before entering Space Shuttle Discovery. The Return to Flight mission to the International Space Station carries the External Stowage Platform-2, equipped with spare part assemblies, and a replacement Control Moment Gyroscope contained in the Lightweight Multi-Purpose Experiment Support Structure and Multi-Purpose Logistics Module Raffaello, housing 15 tons of hardware and supplies that will be transferred to the Station after the Shuttle docks to the complex . On this mission, the crew will perform inspections on-orbit for the first time of all of the Reinforced Carbon-Carbon (RCC) panels on the leading edge of the wings and the Thermal Protection System tiles using the new Canadian-built Orbiter Boom Sensor System and the data from 176 impact and temperature sensors. Mission Specialists will also practice repair techniques on RCC and tile samples during a spacewalk in the payload bay. KSC-05pp1793

KENNEDY SPACE CENTER, FLA. - STS-114 Mission Commander Eileen Collins...

KENNEDY SPACE CENTER, FLA. - STS-114 Mission Commander Eileen Collins is helped by the Closeout Crew with her launch and entry suit before entering Space Shuttle Discovery. The Return to Flight mission to the... More

KENNEDY SPACE CENTER, FLA. - STS-114 Mission Specialist Andrew Thomas is helped by the Closeout Crew with his launch and entry suit before entering Space Shuttle Discovery. The Return to Flight mission to the International Space Station carries the External Stowage Platform-2, equipped with spare part assemblies, and a replacement Control Moment Gyroscope contained in the Lightweight Multi-Purpose Experiment Support Structure and Multi-Purpose Logistics Module Raffaello, housing 15 tons of hardware and supplies that will be transferred to the Station after the Shuttle docks to the complex . On this mission, the crew will perform inspections on-orbit for the first time of all of the Reinforced Carbon-Carbon (RCC) panels on the leading edge of the wings and the Thermal Protection System tiles using the new Canadian-built Orbiter Boom Sensor System and the data from 176 impact and temperature sensors. Mission Specialists will also practice repair techniques on RCC and tile samples during a spacewalk in the payload bay. KSC-05pp1796

KENNEDY SPACE CENTER, FLA. - STS-114 Mission Specialist Andrew Thomas...

KENNEDY SPACE CENTER, FLA. - STS-114 Mission Specialist Andrew Thomas is helped by the Closeout Crew with his launch and entry suit before entering Space Shuttle Discovery. The Return to Flight mission to the ... More

KENNEDY SPACE CENTER, FLA. - STS-114 Mission Specialist Charles Camarda is helped by the Closeout Crew with his launch and entry suit before entering Space Shuttle Discovery. This is Camarda’s first Shuttle flight. The Return to Flight mission to the International Space Station carries the External Stowage Platform-2, equipped with spare part assemblies, and a replacement Control Moment Gyroscope contained in the Lightweight Multi-Purpose Experiment Support Structure and Multi-Purpose Logistics Module Raffaello, housing 15 tons of hardware and supplies that will be transferred to the Station after the Shuttle docks to the complex . On this mission, the crew will perform inspections on-orbit for the first time of all of the Reinforced Carbon-Carbon (RCC) panels on the leading edge of the wings and the Thermal Protection System tiles using the new Canadian-built Orbiter Boom Sensor System and the data from 176 impact and temperature sensors. Mission Specialists will also practice repair techniques on RCC and tile samples during a spacewalk in the payload bay. KSC-05pp1794

KENNEDY SPACE CENTER, FLA. - STS-114 Mission Specialist Charles Camar...

KENNEDY SPACE CENTER, FLA. - STS-114 Mission Specialist Charles Camarda is helped by the Closeout Crew with his launch and entry suit before entering Space Shuttle Discovery. This is Camarda’s first Shuttle f... More

KENNEDY SPACE CENTER, FLA. - Framed by Florida greenery, Space Shuttle Discovery lifts off Launch Pad 39B at 10:39 a.m. EDT on the historic Return to Flight mission STS-114. It is the 114th Space Shuttle flight and the 31st for Discovery. The 12-day mission is expected to end with touchdown at the Shuttle Landing Facility on Aug. 7. On this mission to the International Space Station the crew will perform inspections on-orbit for the first time of all of the Reinforced Carbon-Carbon (RCC) panels on the leading edge of the wings and the Thermal Protection System tiles using the new Canadian-built Orbiter Boom Sensor System and the data from 176 impact and temperature sensors. Mission Specialists will also practice repair techniques on RCC and tile samples during a spacewalk in the payload bay. During two additional spacewalks, the crew will install the External Stowage Platform-2, equipped with spare part assemblies, and a replacement Control Moment Gyroscope contained in the Lightweight Multi-Purpose Experiment Support Structure. KSC-05pp1770

KENNEDY SPACE CENTER, FLA. - Framed by Florida greenery, Space Shuttle...

KENNEDY SPACE CENTER, FLA. - Framed by Florida greenery, Space Shuttle Discovery lifts off Launch Pad 39B at 10:39 a.m. EDT on the historic Return to Flight mission STS-114. It is the 114th Space Shuttle fligh... More

KENNEDY SPACE CENTER, FLA. - Clouds of smoke and steam roll away from Launch Pad 39B as Space Shuttle Discovery roars into the sky. Liftoff of Discovery on the historic Return to Flight mission STS-114. occurred at 10:39 a.m. EDT. On this mission to the International Space Station the crew will perform inspections on-orbit for the first time of all of the Reinforced Carbon-Carbon (RCC) panels on the leading edge of the wings and the Thermal Protection System tiles using the new Canadian-built Orbiter Boom Sensor System and the data from 176 impact and temperature sensors. Mission Specialists will also practice repair techniques on RCC and tile samples during a spacewalk in the payload bay. During two additional spacewalks, the crew will install the External Stowage Platform-2, equipped with spare part assemblies, and a replacement Control Moment Gyroscope contained in the Lightweight Multi-Purpose Experiment Support Structure. The 12-day mission is expected to end with touchdown at the Shuttle Landing Facility on Aug. 7. KSC-05pp1767

KENNEDY SPACE CENTER, FLA. - Clouds of smoke and steam roll away from ...

KENNEDY SPACE CENTER, FLA. - Clouds of smoke and steam roll away from Launch Pad 39B as Space Shuttle Discovery roars into the sky. Liftoff of Discovery on the historic Return to Flight mission STS-114. occurr... More

KENNEDY SPACE CENTER, FLA. - STS-114 Pilot James Kelly is helped by the Closeout Crew with his launch and entry suit before entering Space Shuttle Discovery.The Return to Flight mission to the International Space Station carries the External Stowage Platform-2, equipped with spare part assemblies, and a replacement Control Moment Gyroscope contained in the Lightweight Multi-Purpose Experiment Support Structure and Multi-Purpose Logistics Module Raffaello, housing 15 tons of hardware and supplies that will be transferred to the Station after the Shuttle docks to the complex . On this mission, the crew will perform inspections on-orbit for the first time of all of the Reinforced Carbon-Carbon (RCC) panels on the leading edge of the wings and the Thermal Protection System tiles using the new Canadian-built Orbiter Boom Sensor System and the data from 176 impact and temperature sensors. Mission Specialists will also practice repair techniques on RCC and tile samples during a spacewalk in the payload bay. KSC-05pp1795

KENNEDY SPACE CENTER, FLA. - STS-114 Pilot James Kelly is helped by t...

KENNEDY SPACE CENTER, FLA. - STS-114 Pilot James Kelly is helped by the Closeout Crew with his launch and entry suit before entering Space Shuttle Discovery.The Return to Flight mission to the International Sp... More

KENNEDY SPACE CENTER, FLA. - Space Shuttle Discovery is seen just moments after liftoff as it leaps from Launch Pad 39B on the historic Return to Flight mission STS-114. Liftoff occurred at 10:39 a.m. EDT. It is the 114th Space Shuttle flight and the 31st for Discovery. The 12-day mission is expected to end with touchdown at the Shuttle Landing Facility on Aug. 7. On this mission to the International Space Station the crew will perform inspections on-orbit for the first time of all of the Reinforced Carbon-Carbon (RCC) panels on the leading edge of the wings and the Thermal Protection System tiles using the new Canadian-built Orbiter Boom Sensor System and the data from 176 impact and temperature sensors. Mission Specialists will also practice repair techniques on RCC and tile samples during a spacewalk in the payload bay. During two additional spacewalks, the crew will install the External Stowage Platform-2, equipped with spare part assemblies, and a replacement Control Moment Gyroscope contained in the Lightweight Multi-Purpose Experiment Support Structure. KSC-05pp1776

KENNEDY SPACE CENTER, FLA. - Space Shuttle Discovery is seen just mome...

KENNEDY SPACE CENTER, FLA. - Space Shuttle Discovery is seen just moments after liftoff as it leaps from Launch Pad 39B on the historic Return to Flight mission STS-114. Liftoff occurred at 10:39 a.m. EDT. It... More

KENNEDY SPACE CENTER, FLA. - STS-114 Mission Specialist Wendy Lawrence is helped with her launch and entry suit by the Closeout Crew before entering Space Shuttle Discovery. The Return to Flight mission to the International Space Station carries the External Stowage Platform-2, equipped with spare part assemblies, and a replacement Control Moment Gyroscope contained in the Lightweight Multi-Purpose Experiment Support Structure and Multi-Purpose Logistics Module Raffaello, housing 15 tons of hardware and supplies that will be transferred to the Station after the Shuttle docks to the complex . On this mission, the crew will perform inspections on-orbit for the first time of all of the Reinforced Carbon-Carbon (RCC) panels on the leading edge of the wings and the Thermal Protection System tiles using the new Canadian-built Orbiter Boom Sensor System and the data from 176 impact and temperature sensors. Mission Specialists will also practice repair techniques on RCC and tile samples during a spacewalk in the payload bay. KSC-05pp1798

KENNEDY SPACE CENTER, FLA. - STS-114 Mission Specialist Wendy Lawrenc...

KENNEDY SPACE CENTER, FLA. - STS-114 Mission Specialist Wendy Lawrence is helped with her launch and entry suit by the Closeout Crew before entering Space Shuttle Discovery. The Return to Flight mission to th... More

KENNEDY SPACE CENTER, FLA. - In Orbiter Processing Facility bay 2, United Space Alliance technician Charles Bell monitors a display in Space Shuttle Endeavour's cockpit the first time the orbiter is powered up after nearly two years. Endeavour has been in its Orbiter Major Modification (OMM) period since December 2003. Engineers and technicians spent 900,000 hours performing 124 modifications to the vehicle. These included all recommended return to flight safety modifications, bonding more than 1,000 thermal protection system tiles and inspecting more than 150 miles of wiring throughout Endeavour. Eighty five of the modifications are completed, with work on the additional 39 modifications continuing throughout the next few months. Shuttle major modification periods are scheduled at regular intervals to enhance safety and performance, infuse new technology and allow for thorough inspections of the airframe and wiring of the vehicles. This was the second of these modification periods performed entirely at Kennedy Space Center. Endeavour's previous modification was completed in March 1997. KSC-05pd2298

KENNEDY SPACE CENTER, FLA. - In Orbiter Processing Facility bay 2, U...

KENNEDY SPACE CENTER, FLA. - In Orbiter Processing Facility bay 2, United Space Alliance technician Charles Bell monitors a display in Space Shuttle Endeavour's cockpit the first time the orbiter is powered u... More

KENNEDY SPACE CENTER, FLA. - In Orbiter Processing Facility bay 2, United Space Alliance technician Rob Lewis monitors Space Shuttle Endeavour's electrical system the first time the orbiter is powered up after nearly two years. Endeavour has been in its Orbiter Major Modification (OMM) period since December 2003. Engineers and technicians spent 900,000 hours performing 124 modifications to the vehicle. These included all recommended return to flight safety modifications, bonding more than 1,000 thermal protection system tiles and inspecting more than 150 miles of wiring throughout Endeavour. Eighty five of the modifications are completed, with work on the additional 39 modifications continuing throughout the next few months. Shuttle major modification periods are scheduled at regular intervals to enhance safety and performance, infuse new technology and allow for thorough inspections of the airframe and wiring of the vehicles. This was the second of these modification periods performed entirely at Kennedy Space Center. Endeavour's previous modification was completed in March 1997. KSC-05pd2297

KENNEDY SPACE CENTER, FLA. - In Orbiter Processing Facility bay 2, U...

KENNEDY SPACE CENTER, FLA. - In Orbiter Processing Facility bay 2, United Space Alliance technician Rob Lewis monitors Space Shuttle Endeavour's electrical system the first time the orbiter is powered up afte... More

KENNEDY SPACE CENTER, FLA. - In Orbiter Processing Facility bay 2, United Space Alliance technician Charles Bell examines a display in Space Shuttle Endeavour's cockpit the first time the orbiter is powered up after nearly two years. Endeavour has been in its Orbiter Major Modification (OMM) period since December 2003. Engineers and technicians spent 900,000 hours performing 124 modifications to the vehicle. These included all recommended return to flight safety modifications, bonding more than 1,000 thermal protection system tiles and inspecting more than 150 miles of wiring throughout Endeavour. Eighty five of the modifications are completed, with work on the additional 39 modifications continuing throughout the next few months. Shuttle major modification periods are scheduled at regular intervals to enhance safety and performance, infuse new technology and allow for thorough inspections of the airframe and wiring of the vehicles. This was the second of these modification periods performed entirely at Kennedy Space Center. Endeavour's previous modification was completed in March 1997. KSC-05pd2300

KENNEDY SPACE CENTER, FLA. - In Orbiter Processing Facility bay 2, U...

KENNEDY SPACE CENTER, FLA. - In Orbiter Processing Facility bay 2, United Space Alliance technician Charles Bell examines a display in Space Shuttle Endeavour's cockpit the first time the orbiter is powered u... More

KENNEDY SPACE CENTER, FLA. - In Orbiter Processing Facility bay 2, United Space Alliance technician Loralee Woodbury monitors the lighted display in Space Shuttle Endeavour's cockpit after full powerup, the first time the orbiter has been powered up after nearly two years. Endeavour has been in its Orbiter Major Modification (OMM) period since December 2003. Engineers and technicians spent 900,000 hours performing 124 modifications to the vehicle. These included all recommended return to flight safety modifications, bonding more than 1,000 thermal protection system tiles and inspecting more than 150 miles of wiring throughout Endeavour. Eighty five of the modifications are completed, with work on the additional 39 modifications continuing throughout the next few months. Shuttle major modification periods are scheduled at regular intervals to enhance safety and performance, infuse new technology and allow for thorough inspections of the airframe and wiring of the vehicles. This was the second of these modification periods performed entirely at Kennedy Space Center. Endeavour's previous modification was completed in March 1997. KSC-05pd2301

KENNEDY SPACE CENTER, FLA. - In Orbiter Processing Facility bay 2, U...

KENNEDY SPACE CENTER, FLA. - In Orbiter Processing Facility bay 2, United Space Alliance technician Loralee Woodbury monitors the lighted display in Space Shuttle Endeavour's cockpit after full powerup, the f... More

KENNEDY SPACE CENTER, FLA. - In Orbiter Processing Facility bay 2, United Space Alliance employees Charles Bell, Terri Halverstadt, Loralee Woodbury, and Rob Lewis monitor a display in Space Shuttle Endeavour's cockpit the first time the orbiter is powered up after nearly two years. Endeavour has been in its Orbiter Major Modification (OMM) period since December 2003. Engineers and technicians spent 900,000 hours performing 124 modifications to the vehicle. These included all recommended return to flight safety modifications, bonding more than 1,000 thermal protection system tiles and inspecting more than 150 miles of wiring throughout Endeavour. Eighty five of the modifications are completed, with work on the additional 39 modifications continuing throughout the next few months. Shuttle major modification periods are scheduled at regular intervals to enhance safety and performance, infuse new technology and allow for thorough inspections of the airframe and wiring of the vehicles. This was the second of these modification periods performed entirely at Kennedy Space Center. Endeavour's previous modification was completed in March 1997. KSC-05pd2299

KENNEDY SPACE CENTER, FLA. - In Orbiter Processing Facility bay 2, U...

KENNEDY SPACE CENTER, FLA. - In Orbiter Processing Facility bay 2, United Space Alliance employees Charles Bell, Terri Halverstadt, Loralee Woodbury, and Rob Lewis monitor a display in Space Shuttle Endeavour... More

KENNEDY SPACE CENTER, FLA. - In Orbiter Processing Facility bay 2, United Space Alliance technician Michael Vanwart prepares to install thermal protection system blankets in the nose cap of space shuttle Endeavour. Endeavour recently came out of a nearly two-year Orbiter Major Modification period which began in December 2003. Engineers and technicians spent 900,000 hours performing 124 modifications to the vehicle. These included all recommended return-to-flight safety modifications, bonding more than 1,000 thermal protection system tiles and inspecting more than 150 miles of wiring throughout the orbiter. Shuttle major modification periods are scheduled at regular intervals to enhance safety and performance, infuse new technology, and allow for thorough inspections of the airframe and wiring of the vehicles. This was the second of these modification periods performed entirely at Kennedy Space Center. Endeavour's previous modification was completed in March 1997. KSC-05pd2531

KENNEDY SPACE CENTER, FLA. - In Orbiter Processing Facility bay 2, U...

KENNEDY SPACE CENTER, FLA. - In Orbiter Processing Facility bay 2, United Space Alliance technician Michael Vanwart prepares to install thermal protection system blankets in the nose cap of space shuttle Ende... More

KENNEDY SPACE CENTER, FLA. - In Orbiter Processing Facility Bay 2, the nose cap of space shuttle Endeavour is prepared for installation of thermal protection system blankets. Endeavour recently came out of a nearly two-year Orbiter Major Modification period which began in December 2003. Engineers and technicians spent 900,000 hours performing 124 modifications to the vehicle. These included all recommended return-to-flight safety modifications, bonding more than 1,000 thermal protection system tiles and inspecting more than 150 miles of wiring throughout the orbiter. Shuttle major modification periods are scheduled at regular intervals to enhance safety and performance, infuse new technology, and allow for thorough inspections of the airframe and wiring of the vehicles. This was the second of these modification periods performed entirely at Kennedy Space Center. Endeavour's previous modification was completed in March 1997. KSC-05pd2530

KENNEDY SPACE CENTER, FLA. - In Orbiter Processing Facility Bay 2, t...

KENNEDY SPACE CENTER, FLA. - In Orbiter Processing Facility Bay 2, the nose cap of space shuttle Endeavour is prepared for installation of thermal protection system blankets. Endeavour recently came out of a ... More

KENNEDY SPACE CENTER, FLA. - In Orbiter Processing Facility Bay 2, United Space Alliance technician Michael Vanwart installs thermal protection system blankets in the nose cap of space shuttle Endeavour. Endeavour recently came out of a nearly two-year Orbiter Major Modification period which began in December 2003. Engineers and technicians spent 900,000 hours performing 124 modifications to the vehicle. These included all recommended return-to-flight safety modifications, bonding more than 1,000 thermal protection system tiles and inspecting more than 150 miles of wiring throughout the orbiter. Shuttle major modification periods are scheduled at regular intervals to enhance safety and performance, infuse new technology, and allow for thorough inspections of the airframe and wiring of the vehicles. This was the second of these modification periods performed entirely at Kennedy Space Center. Endeavour's previous modification was completed in March 1997. KSC-05pd2533

KENNEDY SPACE CENTER, FLA. - In Orbiter Processing Facility Bay 2, U...

KENNEDY SPACE CENTER, FLA. - In Orbiter Processing Facility Bay 2, United Space Alliance technician Michael Vanwart installs thermal protection system blankets in the nose cap of space shuttle Endeavour. Ende... More

KENNEDY SPACE CENTER, FLA. - In Orbiter Processing Facility Bay 2, United Space Alliance technician Michael Vanwart installs thermal protection system blankets in the nose cap of space shuttle Endeavour. Endeavour recently came out of a nearly two-year Orbiter Major Modification period which began in December 2003. Engineers and technicians spent 900,000 hours performing 124 modifications to the vehicle. These included all recommended return-to-flight safety modifications, bonding more than 1,000 thermal protection system tiles and inspecting more than 150 miles of wiring throughout the orbiter. Shuttle major modification periods are scheduled at regular intervals to enhance safety and performance, infuse new technology, and allow for thorough inspections of the airframe and wiring of the vehicles. This was the second of these modification periods performed entirely at Kennedy Space Center. Endeavour's previous modification was completed in March 1997. KSC-05pd2532

KENNEDY SPACE CENTER, FLA. - In Orbiter Processing Facility Bay 2, U...

KENNEDY SPACE CENTER, FLA. - In Orbiter Processing Facility Bay 2, United Space Alliance technician Michael Vanwart installs thermal protection system blankets in the nose cap of space shuttle Endeavour. Ende... More

KENNEDY SPACE CENTER, FLA. -- On the Shuttle Landing Facility at NASA's Kennedy Space Center, the orbiter Endeavour is ready to be towed to the Orbiter Processing Facility, known as the OPF. Endeavour returned to Earth Aug. 21 from mission STS-118, landing at Kennedy at 12:32 p.m. EDT. In the OPF bay 2, Endeavour will incur thermal protection system inspections and numerous other post-flight inspections before processing starts for its next voyage into space. Endeavour will next fly on mission STS-123 targeted for Feb. 14, 2008. Photo credit: NASA/Jack Pfaller KSC-07pd2359

KENNEDY SPACE CENTER, FLA. -- On the Shuttle Landing Facility at NAS...

KENNEDY SPACE CENTER, FLA. -- On the Shuttle Landing Facility at NASA's Kennedy Space Center, the orbiter Endeavour is ready to be towed to the Orbiter Processing Facility, known as the OPF. Endeavour return... More

KENNEDY SPACE CENTER, FLA. -- On the Shuttle Landing Facility at NASA's Kennedy Space Center, the orbiter Endeavour is ready to be towed to the Orbiter Processing Facility, known as the OPF. At far left is the towering Vehicle Assembly Building. Next to it, just on the horizon, are the OPF hangars. Endeavour returned to Earth Aug. 21 from mission STS-118, landing at Kennedy at 12:32 p.m. EDT. In the OPF bay 2, Endeavour will incur thermal protection system inspections and numerous other post-flight inspections before processing starts for its next voyage into space. Endeavour will next fly on mission STS-123 targeted for Feb. 14, 2008. Photo credit: NASA/Jack Pfaller KSC-07pd2361

KENNEDY SPACE CENTER, FLA. -- On the Shuttle Landing Facility at NAS...

KENNEDY SPACE CENTER, FLA. -- On the Shuttle Landing Facility at NASA's Kennedy Space Center, the orbiter Endeavour is ready to be towed to the Orbiter Processing Facility, known as the OPF. At far left is t... More

KENNEDY SPACE CENTER, FLA. -- The orbiter Endeavour is towed into bay 2 of the Orbiter Processing Facility, known as the OPF. Endeavour returned to Earth Aug. 21 from mission STS-118, landing at Kennedy at 12:32 p.m. EDT. In the OPF bay 2, Endeavour will incur thermal protection system inspections and numerous other post-flight inspections before processing starts for its next voyage into space. Endeavour will next fly on mission STS-123 targeted for Feb. 14, 2008. Photo credit: NASA/Jack Pfaller KSC-07pd2364

KENNEDY SPACE CENTER, FLA. -- The orbiter Endeavour is towed into b...

KENNEDY SPACE CENTER, FLA. -- The orbiter Endeavour is towed into bay 2 of the Orbiter Processing Facility, known as the OPF. Endeavour returned to Earth Aug. 21 from mission STS-118, landing at Kennedy at ... More

KENNEDY SPACE CENTER, FLA. -- The orbiter Endeavour is towed toward the Orbiter Processing Facility, known as the OPF. At left is the Convoy Command Vehicle. The mobile command center is the prime vehicle to control critical communications between the orbiter, the crew and the Launch Control Center after a shuttle landing to monitor the health of the shuttle orbiter systems and to direct convoy operations at the Shuttle Landing Facility. Endeavour returned to Earth Aug. 21 from mission STS-118, landing at Kennedy at 12:32 p.m. EDT. In the OPF bay 2, Endeavour will incur thermal protection system inspections and numerous other post-flight inspections before processing starts for its next voyage into space. Endeavour will next fly on mission STS-123 targeted for Feb. 14, 2008. Photo credit: NASA/Jack Pfaller KSC-07pd2362

KENNEDY SPACE CENTER, FLA. -- The orbiter Endeavour is towed toward...

KENNEDY SPACE CENTER, FLA. -- The orbiter Endeavour is towed toward the Orbiter Processing Facility, known as the OPF. At left is the Convoy Command Vehicle. The mobile command center is the prime vehicle ... More

KENNEDY SPACE CENTER, FLA. -- The orbiter Endeavour is towed toward the open doors of bay 2 of the Orbiter Processing Facility, known as the OPF. Endeavour returned to Earth Aug. 21 from mission STS-118, landing at Kennedy at 12:32 p.m. EDT. In the OPF bay 2, Endeavour will incur thermal protection system inspections and numerous other post-flight inspections before processing starts for its next voyage into space. Endeavour will next fly on mission STS-123 targeted for Feb. 14, 2008. Photo credit: NASA/Jack Pfaller KSC-07pd2363

KENNEDY SPACE CENTER, FLA. -- The orbiter Endeavour is towed toward...

KENNEDY SPACE CENTER, FLA. -- The orbiter Endeavour is towed toward the open doors of bay 2 of the Orbiter Processing Facility, known as the OPF. Endeavour returned to Earth Aug. 21 from mission STS-118, la... More

KENNEDY SPACE CENTER, FLA. -- The orbiter Endeavour is maneuvered into place inside bay 2 of the Orbiter Processing Facility, known as the OPF. Endeavour returned to Earth Aug. 21 from mission STS-118, landing at Kennedy at 12:32 p.m. EDT. In the OPF bay 2, Endeavour will incur thermal protection system inspections and numerous other post-flight inspections before processing starts for its next voyage into space. Endeavour will next fly on mission STS-123 targeted for Feb. 14, 2008. Photo credit: NASA/Jack Pfaller KSC-07pd2365

KENNEDY SPACE CENTER, FLA. -- The orbiter Endeavour is maneuvered int...

KENNEDY SPACE CENTER, FLA. -- The orbiter Endeavour is maneuvered into place inside bay 2 of the Orbiter Processing Facility, known as the OPF. Endeavour returned to Earth Aug. 21 from mission STS-118, landin... More

KENNEDY SPACE CENTER, FLA. -- On the Shuttle Landing Facility at NASA's Kennedy Space Center, the orbiter Endeavour is ready to be towed to the Orbiter Processing Facility, known as the OPF. Endeavour returned to Earth Aug. 21 from mission STS-118, landing at Kennedy at 12:32 p.m. EDT. In the OPF bay 2, Endeavour will incur thermal protection system inspections and numerous other post-flight inspections before processing starts for its next voyage into space. Endeavour will next fly on mission STS-123 targeted for Feb. 14, 2008. Photo credit: NASA/Jack Pfaller KSC-07pd2360

KENNEDY SPACE CENTER, FLA. -- On the Shuttle Landing Facility at NAS...

KENNEDY SPACE CENTER, FLA. -- On the Shuttle Landing Facility at NASA's Kennedy Space Center, the orbiter Endeavour is ready to be towed to the Orbiter Processing Facility, known as the OPF. Endeavour returne... More

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, tours, [flights, inspections] [48-DPA-08-12-08_SOI_K_AZ_Border_Pat_DOI_6400.JPG]

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary D...

Complete assignment is listed as: Subject: Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, ... More

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, tours, [flights, inspections] [48-DPA-08-12-08_SOI_K_AZ_Border_Pat_DOI_6380.JPG]

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary D...

Complete assignment is listed as: Subject: Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, ... More

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, tours, [flights, inspections] [48-DPA-08-12-08_SOI_K_AZ_Border_Pat_DOI_6406.JPG]

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary D...

Complete assignment is listed as: Subject: Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, ... More

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, tours, [flights, inspections] [48-DPA-08-12-08_SOI_K_AZ_Border_Pat_DOI_6402.JPG]

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary D...

Complete assignment is listed as: Subject: Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, ... More

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, tours, [flights, inspections] [48-DPA-08-12-08_SOI_K_AZ_Border_Pat_DOI_6475.JPG]

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary D...

Complete assignment is listed as: Subject: Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, ... More

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, tours, [flights, inspections] [48-DPA-08-12-08_SOI_K_AZ_Border_Pat_IOD_2340.JPG]

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary D...

Complete assignment is listed as: Subject: Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, ... More

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, tours, [flights, inspections] [48-DPA-08-12-08_SOI_K_AZ_Border_Pat_DOI_6365.JPG]

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary D...

Complete assignment is listed as: Subject: Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, ... More

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, tours, [flights, inspections] [48-DPA-08-12-08_SOI_K_AZ_Border_Pat_IOD_2582.JPG]

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary D...

Complete assignment is listed as: Subject: Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, ... More

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, tours, [flights, inspections] [48-DPA-08-12-08_SOI_K_AZ_Border_Pat_IOD_2542.JPG]

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary D...

Complete assignment is listed as: Subject: Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, ... More

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, tours, [flights, inspections] [48-DPA-08-12-08_SOI_K_AZ_Border_Pat_IOD_2504.JPG]

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary D...

Complete assignment is listed as: Subject: Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, ... More

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, tours, [flights, inspections] [48-DPA-08-12-08_SOI_K_AZ_Border_Pat_DOI_6463.JPG]

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary D...

Complete assignment is listed as: Subject: Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, ... More

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, tours, [flights, inspections] [48-DPA-08-12-08_SOI_K_AZ_Border_Pat_IOD_2324.JPG]

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary D...

Complete assignment is listed as: Subject: Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, ... More

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, tours, [flights, inspections] [48-DPA-08-12-08_SOI_K_AZ_Border_Pat_DOI_6490.JPG]

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary D...

Complete assignment is listed as: Subject: Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, ... More

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, tours, [flights, inspections] [48-DPA-08-12-08_SOI_K_AZ_Border_Pat_IOD_2512.JPG]

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary D...

Complete assignment is listed as: Subject: Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, ... More

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, tours, [flights, inspections] [48-DPA-08-12-08_SOI_K_AZ_Border_Pat_DOI_6412.JPG]

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary D...

Complete assignment is listed as: Subject: Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, ... More

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, tours, [flights, inspections] [48-DPA-08-12-08_SOI_K_AZ_Border_Pat_IOD_2623.JPG]

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary D...

Complete assignment is listed as: Subject: Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, ... More

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, tours, [flights, inspections] [48-DPA-08-12-08_SOI_K_AZ_Border_Pat_IOD_2315.JPG]

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary D...

Complete assignment is listed as: Subject: Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, ... More

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, tours, [flights, inspections] [48-DPA-08-12-08_SOI_K_AZ_Border_Pat_IOD_2290.JPG]

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary D...

Complete assignment is listed as: Subject: Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, ... More

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, tours, [flights, inspections] [48-DPA-08-12-08_SOI_K_AZ_Border_Pat_DOI_6500.JPG]

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary D...

Complete assignment is listed as: Subject: Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, ... More

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, tours, [flights, inspections] [48-DPA-08-12-08_SOI_K_AZ_Border_Pat_IOD_2692.JPG]

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary D...

Complete assignment is listed as: Subject: Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, ... More

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, tours, [flights, inspections] [48-DPA-08-12-08_SOI_K_AZ_Border_Pat_DOI_6467.JPG]

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary D...

Complete assignment is listed as: Subject: Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, ... More

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, tours, [flights, inspections] [48-DPA-08-12-08_SOI_K_AZ_Border_Pat_IOD_2331.JPG]

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary D...

Complete assignment is listed as: Subject: Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, ... More

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, tours, [flights, inspections] [48-DPA-08-12-08_SOI_K_AZ_Border_Pat_IOD_2444.JPG]

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary D...

Complete assignment is listed as: Subject: Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, ... More

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, tours, [flights, inspections] [48-DPA-08-12-08_SOI_K_AZ_Border_Pat_IOD_2515.JPG]

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary D...

Complete assignment is listed as: Subject: Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, ... More

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, tours, [flights, inspections] [48-DPA-08-12-08_SOI_K_AZ_Border_Pat_IOD_2363.JPG]

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary D...

Complete assignment is listed as: Subject: Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, ... More

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, tours, [flights, inspections] [48-DPA-08-12-08_SOI_K_AZ_Border_Pat_IOD_2663.JPG]

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary D...

Complete assignment is listed as: Subject: Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, ... More

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, tours, [flights, inspections] [48-DPA-08-12-08_SOI_K_AZ_Border_Pat_IOD_2633.JPG]

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary D...

Complete assignment is listed as: Subject: Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, ... More

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, tours, [flights, inspections] [48-DPA-08-12-08_SOI_K_AZ_Border_Pat_IOD_2408.JPG]

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary D...

Complete assignment is listed as: Subject: Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, ... More

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, tours, [flights, inspections] [48-DPA-08-12-08_SOI_K_AZ_Border_Pat_DOI_6413.JPG]

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary D...

Complete assignment is listed as: Subject: Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, ... More

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, tours, [flights, inspections] [48-DPA-08-12-08_SOI_K_AZ_Border_Pat_DOI_6455.JPG]

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary D...

Complete assignment is listed as: Subject: Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, ... More

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, tours, [flights, inspections] [48-DPA-08-12-08_SOI_K_AZ_Border_Pat_IOD_2612.JPG]

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary D...

Complete assignment is listed as: Subject: Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, ... More

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, tours, [flights, inspections] [48-DPA-08-12-08_SOI_K_AZ_Border_Pat_IOD_2285.JPG]

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary D...

Complete assignment is listed as: Subject: Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, ... More

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, tours, [flights, inspections] [48-DPA-08-12-08_SOI_K_AZ_Border_Pat_IOD_2429.JPG]

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary D...

Complete assignment is listed as: Subject: Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, ... More

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, tours, [flights, inspections] [48-DPA-08-12-08_SOI_K_AZ_Border_Pat_DOI_6354.JPG]

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary D...

Complete assignment is listed as: Subject: Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, ... More

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, tours, [flights, inspections] [48-DPA-08-12-08_SOI_K_AZ_Border_Pat_IOD_2304.JPG]

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary D...

Complete assignment is listed as: Subject: Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, ... More

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, tours, [flights, inspections] [48-DPA-08-12-08_SOI_K_AZ_Border_Pat_DOI_6398.JPG]

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary D...

Complete assignment is listed as: Subject: Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, ... More

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, tours, [flights, inspections] [48-DPA-08-12-08_SOI_K_AZ_Border_Pat_IOD_2590.JPG]

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary D...

Complete assignment is listed as: Subject: Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, ... More

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, tours, [flights, inspections] [48-DPA-08-12-08_SOI_K_AZ_Border_Pat_IOD_2299.JPG]

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary D...

Complete assignment is listed as: Subject: Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, ... More

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, tours, [flights, inspections] [48-DPA-08-12-08_SOI_K_AZ_Border_Pat_DOI_6477.JPG]

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary D...

Complete assignment is listed as: Subject: Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, ... More

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, tours, [flights, inspections] [48-DPA-08-12-08_SOI_K_AZ_Border_Pat_DOI_6366.JPG]

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary D...

Complete assignment is listed as: Subject: Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, ... More

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, tours, [flights, inspections] [48-DPA-08-12-08_SOI_K_AZ_Border_Pat_IOD_2362.JPG]

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary D...

Complete assignment is listed as: Subject: Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, ... More

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, tours, [flights, inspections] [48-DPA-08-12-08_SOI_K_AZ_Border_Pat_IOD_2597.JPG]

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary D...

Complete assignment is listed as: Subject: Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, ... More

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, tours, [flights, inspections] [48-DPA-08-12-08_SOI_K_AZ_Border_Pat_DOI_6446.JPG]

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary D...

Complete assignment is listed as: Subject: Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, ... More

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, tours, [flights, inspections] [48-DPA-08-12-08_SOI_K_AZ_Border_Pat_DOI_6433.JPG]

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary D...

Complete assignment is listed as: Subject: Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, ... More

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, tours, [flights, inspections] [48-DPA-08-12-08_SOI_K_AZ_Border_Pat_IOD_2427.JPG]

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary D...

Complete assignment is listed as: Subject: Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, ... More

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, tours, [flights, inspections] [48-DPA-08-12-08_SOI_K_AZ_Border_Pat_IOD_2589.JPG]

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary D...

Complete assignment is listed as: Subject: Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, ... More

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, tours, [flights, inspections] [48-DPA-08-12-08_SOI_K_AZ_Border_Pat_DOI_6460.JPG]

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary D...

Complete assignment is listed as: Subject: Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, ... More

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, tours, [flights, inspections] [48-DPA-08-12-08_SOI_K_AZ_Border_Pat_DOI_6418.JPG]

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary D...

Complete assignment is listed as: Subject: Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, ... More

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, tours, [flights, inspections] [48-DPA-08-12-08_SOI_K_AZ_Border_Pat_DOI_6465.JPG]

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary D...

Complete assignment is listed as: Subject: Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, ... More

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, tours, [flights, inspections] [48-DPA-08-12-08_SOI_K_AZ_Border_Pat_IOD_2321.JPG]

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary D...

Complete assignment is listed as: Subject: Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, ... More

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, tours, [flights, inspections] [48-DPA-08-12-08_SOI_K_AZ_Border_Pat_DOI_6482.JPG]

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary D...

Complete assignment is listed as: Subject: Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, ... More

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, tours, [flights, inspections] [48-DPA-08-12-08_SOI_K_AZ_Border_Pat_IOD_2592.JPG]

[Assignment: 48-DPA-08-12-08_SOI_K_AZ_Border_Pat] Visit of Secretary D...

Complete assignment is listed as: Subject: Visit of Secretary Dirk Kempthorne to [Pima County,] Arizona's border area with Mexico, [where he joined] U.S. Customs and Border Protection personnel for meetings, ... More

Previous

of 4

Next