NASA GLORY SPACECRAFT AT ORBITAL SCIENCES CLEANROOM

Similar

VANDENBERG AIR FORCE BASE, CALIF. - At Vandenberg AFB, Calif., a solar array is tested before installing on the SciSat-1 spacecraft. The SciSat-1 weighs approximately 330 pounds and after launch will be placed in a 400-mile-high polar orbit to investigate processes that control the distribution of ozone in the upper atmosphere. The data from the satellite will provide Canadian and international scientists with improved measurements relating to global ozone processes and help policymakers assess existing environmental policy and develop protective measures for improving the health of our atmosphere, preventing further ozone depletion. The mission is designed to last two years.

VANDENBERG AIR FORCE BASE, CALIF. - At Vandenberg AFB, Calif., a solar array is tested before installing on the SciSat-1 spacecraft. The SciSat-1 weighs approximately 330 pounds and after launch will be placed in a 400-mile-high polar orbit to investigate processes that control the distribution of ozone in the upper atmosphere. The data from the satellite will provide Canadian and international scientists with improved measurements relating to global ozone processes and help policymakers assess existing environmental policy and develop protective measures for improving the health of our atmosphere, preventing further ozone depletion. The mission is designed to last two years.

CAPE CANAVERAL, Fla. – At Astrotech Space Operations Facility in Titusville, Fla., NASA's Lunar Reconnaissance Orbiter, or LRO, and NASA's Lunar Crater Observation and Sensing Satellite, known as LCROSS,wait for fairing installation. The fairing halves are on left and right of the spacecraft. The fairing is a molded structure that fits flush with the outside surface of the rocket and forms an aerodynamically smooth nose cone, protecting the spacecraft during launch and ascent. The LRO includes five instruments: DIVINER, LAMP, LEND, LOLA and LROC. They will be launched aboard an Atlas V/Centaur rocket no earlier than June 17 from Launch Complex-41 on Cape Canaveral Air Force Station in Florida. Photo credit: NASA/Jack Pfaller KSC-2009-3183

CAPE CANAVERAL, Fla. – At Astrotech Space Operations Facility in Titusville, Fla., NASA's Lunar Reconnaissance Orbiter, or LRO, and NASA's Lunar Crater Observation and Sensing Satellite, known as LCROSS,wait for fairing installation. The fairing halves are on left and right of the spacecraft. The fairing is a molded structure that fits flush with the outside surface of the rocket and forms an aerodynamically smooth nose cone, protecting the spacecraft during launch and ascent. The LRO includes five instruments: DIVINER, LAMP, LEND, LOLA and LROC. They will be launched aboard an Atlas V/Centaur rocket no earlier than June 17 from Launch Complex-41 on Cape Canaveral Air Force Station in Florida. Photo credit: NASA/Jack Pfaller KSC-2009-3183

KENNEDY SPACE CENTER, FLA. -- Near the bottom of the solid rocket booster, a United Space Alliance SRB technician in the Vehicle Assembly Building detaches the SRB system tunnel cover of the 36 cables inside. Above and to the left is the bottom of the external tank. The SRB is part of Space Shuttle Atlantis, rolled back from Launch Pad 39A in order to conduct tests on the cables. A prior extensive evaluation of NASA’s SRB cable inventory on the shelf revealed conductor damage in four (of about 200) cables. Shuttle managers decided to prove the integrity of the system tunnel cables already on Atlantis before launching. Workers are conducting inspections, making continuity checks and conducting X-ray analysis on the cables. The launch has been rescheduled no earlier than Feb. 6. <br KSC01pp0148

KENNEDY SPACE CENTER, FLA. -- Near the bottom of the solid rocket booster, a United Space Alliance SRB technician in the Vehicle Assembly Building detaches the SRB system tunnel cover of the 36 cables inside. Above and to the left is the bottom of the external tank. The SRB is part of Space Shuttle Atlantis, rolled back from Launch Pad 39A in order to conduct tests on the cables. A prior extensive evaluation of NASA’s SRB cable inventory on the shelf revealed conductor damage in four (of about 200) cables. Shuttle managers decided to prove the integrity of the system tunnel cables already on Atlantis before launching. Workers are conducting inspections, making continuity checks and conducting X-ray analysis on the cables. The launch has been rescheduled no earlier than Feb. 6. <br KSC01pp0148

S125E011930 - STS-125 - Survey views taken prior to HST separation from the Shuttle Atlantis

S125E011930 - STS-125 - Survey views taken prior to HST separation from the Shuttle Atlantis

KENNEDY SPACE CENTER, FLA. - At the Astrotech Space Operations processing facilities, NASA’s MESSENGER spacecraft is lifted off the pallet for transfer to a work stand. There employees of the Johns Hopkins University Applied Physics Laboratory, builders of the spacecraft, will perform an initial state-of-health check. Then processing for launch can begin, including checkout of the power systems, communications systems and control systems. The thermal blankets will also be attached for flight. MESSENGER - short for MErcury Surface, Space ENvironment, GEochemistry and Ranging - will be launched May 11 on a six-year mission aboard a Boeing Delta II rocket. Liftoff is targeted for 2:26 a.m. EDT on Tuesday, May 11.

KENNEDY SPACE CENTER, FLA. - At the Astrotech Space Operations processing facilities, NASA’s MESSENGER spacecraft is lifted off the pallet for transfer to a work stand. There employees of the Johns Hopkins University Applied Physics Laboratory, builders of the spacecraft, will perform an initial state-of-health check. Then processing for launch can begin, including checkout of the power systems, communications systems and control systems. The thermal blankets will also be attached for flight. MESSENGER - short for MErcury Surface, Space ENvironment, GEochemistry and Ranging - will be launched May 11 on a six-year mission aboard a Boeing Delta II rocket. Liftoff is targeted for 2:26 a.m. EDT on Tuesday, May 11.

The Huygens probe is installed into the Cassini orbiter in the Payload Hazardous Servicing Facility (PHSF) KSC-97PC1095

The Huygens probe is installed into the Cassini orbiter in the Payload Hazardous Servicing Facility (PHSF) KSC-97PC1095

NASA GLORY SPACECRAFT AT ORBITAL SCIENCES CLEANROOM

description

Summary

The original finding aid described this as:

Description: NASA GLORY SPACECRAFT W/SOLAR ARRAY DEPLOYED + STOWED AT ORBITAL SCIENCES CLEANROOM . DULLES,VA.

Photographer: BILL HRYBYK

Date: 10/15/2009

Job Number: 2010-00067-0

Preservation Copy: .tif
2009

label_outline

Tags

nasa
glory
spacecraft
nasa glory spacecraft
orbital
sciences
cleanroom
solar array
high resolution
ultra high resolution
orbital sciences cleanroom
nasa glory spacecraft w
bill hrybyk
job number
preservation copy
satellite
space program
date_range

Date

2006 - 2011
create

Source

The U.S. National Archives
link

Link

https://catalog.archives.gov/
copyright

Copyright info

No known copyright restrictions

Explore more

nasa
nasa
glory
glory
spacecraft
spacecraft
nasa glory spacecraft
nasa glory spacecraft
orbital
orbital
sciences
sciences
cleanroom
cleanroom
solar array
solar array
high resolution
high resolution
ultra high resolution
ultra high resolution
orbital sciences cleanroom
orbital sciences cleanroom
nasa glory spacecraft w
nasa glory spacecraft w
bill hrybyk
bill hrybyk
job number
job number
preservation copy
preservation copy
satellite
satellite
space program
space program