entomology

insects

moths

new zealand

the butterflies moths of new zealand 1928

zoological illustration

watercolors

butterflies

paintings in te papa

batteries

3,144 media by topic ∙ page 2 of 32
U.S.S. Oregon, engaging shore batteries at Santiago

U.S.S. Oregon, engaging shore batteries at Santiago

Picryl description: Public domain photograph of a ship, docks, navy, free to use, no copyright restrictions.

The mortar batteries at Sandy Hook, defending the approaches to New York Harbor / C. Beecher Bunnell.

The mortar batteries at Sandy Hook, defending the approaches to New Yo...

Illus. in: Frank Leslie's illustrated newspaper, 1898 April 7, p. 220. Reproduction of painting by Charles Beecher Bunnell.

U.S.S. OREGON engaging shore batteries at Santiago [de Cuba]

U.S.S. OREGON engaging shore batteries at Santiago [de Cuba]

Photograph by the Detroit Publishing Co. Detroit Publishing Company Photograph Collection (Library of Congress). This record contains unverified, old data from caption card. Caption card tracings: Cuba Santiago... More

Brent Daniel, formerly of the Radio Laboratory of the Bureau of Standards at Washington, with the first portable Super-Heterodyne, his own design. The seven vacuum tubes, batteries, loop antenna, loud speaker, and other necessary units are completely self-contained in the carrying case. He has been able to hear Pacific Coast stations from this outfit

Brent Daniel, formerly of the Radio Laboratory of the Bureau of Standa...

Public domain photograph of laboratory, science, research, free to use, no copyright restrictions image - Picryl description

Map of a part of the east cavalry field showing positions of division and brigade markers and batteries

Map of a part of the east cavalry field showing positions of division ...

Scale 1:7200. LC Civil War Maps (2nd ed.), 351.2 "No. 692" is in the upper left corner. Map of the area between York Pike and Hanover Road showing battlefield markers, fence lines, roads, woodland, and contour ... More

Pack mule of U.S. Army Signal Corps, used for carrying storage batteries for the field wireless telegraph

Pack mule of U.S. Army Signal Corps, used for carrying storage batteri...

Public domain image of horse carriage, free to use, no copyright restrictions image - Picryl description

Madeline Causey ten year old worker in Merrimack Mills. Been working there for four months. Fills batteries. Her mother said she was born July 8, 1903. See Hine report. Location: Huntsville, Alabama.

Madeline Causey ten year old worker in Merrimack Mills. Been working t...

Picryl description: Public domain image of child labor, exploitation, children workers, economic conditions, free to use, no copyright restrictions.

British and French batteries having a tug-of-war. Aveluy, France. September 1916

British and French batteries having a tug-of-war. Aveluy, France. Sept...

British Photographs of World War I Public domain photograph - British army, military forces, during World War One, free to use, no copyright restrictions image - Picryl description

Heavy gun batteries of the KAISER

Heavy gun batteries of the KAISER

Photograph shows reproduction of a postcard showing the German battleship Kaiser. (Source: Flickr Commons project, 2014)

Situated near the gun batteries of the coastal bluffs, Fort Scott was established in 1912 to serve as headquarters for the Coastal Artillery Corps of the San Francisco Bay area. Spanish Revival style buildings, the first of this style to be built on the Presidio, characterize the post, and the U-shaped parade ground breaks from traditional quadrangular design. This image appears to be pre WWI, titled Look em Over. With troops standing by their erected tents and gear placed in front

Situated near the gun batteries of the coastal bluffs, Fort Scott was ...

The original finding aid described this photograph as: Base: Fort Winfield Scott State: California (CA) Country: United States Of America (USA) Scene Camera Operator: Unknown Release Status: Released to Pu... More

Airplanes - Instruments - Manufactured articles for use of government. Automatic Bookkeeping Register Co's Plant, Kansas City, MO. Tachyscopes for anti-aircraft batteries

Airplanes - Instruments - Manufactured articles for use of government....

Photographer: Auto. Bkkpg. Register Co. Airplanes - Instruments Public domain photograph related to the United States in World War One, free to use, no copyright restrictions image - Picryl description

Camouflage - Soldiers Training - Members of the Camouflage Squad working on a model in which they will develop methods of concealing batteries, roads, etc. from enemy view. The work of camouflage developed in the great war is more important than ever before. It is a regular branch of the army service

Camouflage - Soldiers Training - Members of the Camouflage Squad worki...

Date Taken: 3/19/1918 Photographer: Underwood & Underwood Camouflage - Soldiers Training

Colleges and Universities - Yale University - Yale University. Showing the type of U.S.A. guns (3 inch field piece) used by the first Yale Batteries in the spring of 1916 at the commencement baseball game at Yale Field, New Haven, Connecticut

Colleges and Universities - Yale University - Yale University. Showing...

Original Caption: Yale University. Showing the type of U.S.A. guns (3 inch field piece) used by the first Yale Batteries in the spring of 1916 at the commencement baseball game at Yale Field, New Haven, Connect... More

Camouflage - Miscellaneous - One of the emplacements from the front, giving an idea of the roof of the dugout, of the size of the opening, in consequence of field of fire. It should be noted, in the construction of emplacements, that the larger the aperture, the more imperfect is the concealment and that the exposure of batteries is being brought close to the line for a given field of fire is made less safe not only by their approach to the enemy, but by the increased difficulty in the constuction and concealment of their position

Camouflage - Miscellaneous - One of the emplacements from the front, g...

Photographer: Major Francis T. Colby, U.S.A. Camouflage - Miscellaneous Public domain photograph related to the United States in World War One, free to use, no copyright restrictions image - Picryl description

Camouflage - Roads - Camouflaged batteries along road to Cote au Calan, Meuse, France

Camouflage - Roads - Camouflaged batteries along road to Cote au Calan...

Photographer: Capt. Moore, French Official Camouflage - Roads Public domain photograph related to the United States in World War One, free to use, no copyright restrictions image - Picryl description

With a topographic section on the Western front. Making plans for batteries

With a topographic section on the Western front. Making plans for batt...

German Military Activities and Personnel Public domain photograph - German army, military forces during World War One, free to use, no copyright restrictions image - Picryl description

Camouflage - Miscellaneous - Shows the gun emplacement from the rear; one of the ammunition racks is at the side of the piece. The amount of water in the emplacement shows the need of issuing pumps to batteries dug in below the normal water level. The burlap covering the square black shadow at the rear of the piece is obviously not sufficient, and a good enemy air service should have detected the battery on this weakness

Camouflage - Miscellaneous - Shows the gun emplacement from the rear; ...

Photographer: Major Francis T. Colby, U.S.A. Camouflage - Miscellaneous Public domain photograph related to the United States in World War One, free to use, no copyright restrictions image - Picryl description

Western front. Making a smoke screen to cover the firing of heavy batteries. June 1917

Western front. Making a smoke screen to cover the firing of heavy batt...

German Military Activities and Personnel Public domain photograph - German army, military forces during World War One, free to use, no copyright restrictions image - Picryl description

Colleges and Universities - Yale University - Yale Batteries going to Sherman Field at Tobyhanna, Pennsylvania for mounted drill. 1917

Colleges and Universities - Yale University - Yale Batteries going to ...

Colleges and Universities - Yale University Public domain photograph related to the United States in World War One, free to use, no copyright restrictions image - Picryl description

Airplanes - Instruments - Manufactured articles for government use. Automatic bookkeeping register Company Plant, Kansas City, MO. Tachyscope with wind scale for anti-aircraft batteries

Airplanes - Instruments - Manufactured articles for government use. Au...

Photographer: Auto. Bkkeeping. Register Co. Airplanes - Instruments Public domain photograph related to the United States in World War One, free to use, no copyright restrictions image - Picryl description

Position of batteries & units of fire : [Stenay].

Position of batteries & units of fire : [Stenay].

Shows northwestern vicinity of Stenay. "10 Nov. 1918." At head of title: Hdqrs. Div. Arty., 89" Div. Accompanied by typescript text: Plan of attack for supporting attack of 177th Infantry Brigade. [1] leaf ; 34... More

H.S. [i.e., Herbert Samuel] reception F.A. batteries, June 30, 1920

H.S. [i.e., Herbert Samuel] reception F.A. batteries, June 30, 1920

Picryl description: Public domain image of an artillery gun, or cannon, free to use, no copyright restrictions.

[Automobile batteries on conveyor]

[Automobile batteries on conveyor]

Picryl description: Public domain image of an industrial building, factory, workshop, workers, 19th-20th century, free to use, no copyright restrictions.

[3,500 batteries] - Public domain image. Dry plate negative.

[3,500 batteries] - Public domain image. Dry plate negative.

Public domain image of an industrial building, factory, structure, works, 19th-20th century industrial revolution, free to use, no copyright restrictions - Picryl description

Here is the "inside workings" of the automatic telephone, located at the Smithsonian Instituion, Wash., being operated by Carl Mitman. The electro magnets do all the work. The current necessary to operate these magnets is supplied by 32 dry batteries located in the box at the left. The motor generator is along side. This machine is capable of operating 50 telephones

Here is the "inside workings" of the automatic telephone, located at t...

Gun mount, Battery Davis, 1937 - Public Domain image, National Parks Gallery

Gun mount, Battery Davis, 1937 - Public Domain image, National Parks G...

“Battery Davis, Fort Funston, Calif., no. 1 gun mount, Dec. 18, 1937."

Soil stabilization, Battery Davis, 1938

Soil stabilization, Battery Davis, 1938

“Battery Davis, Fort Funston, Ca., soil stabilization, third operation, April 21, 1938”

Jewish factories in Palestine on Plain of Sharon & along the coast to Haifa. Haifa. The "Ady" Storage Batteries Co. Charging & storage of batteries

Jewish factories in Palestine on Plain of Sharon & along the coast to ...

Picryl description: Public domain photograph of city street life, vendor, shop sign, free to use, no copyright restrictions.

Jewish factories in Palestine on Plain of Sharon & along the coast to Haifa. Haifa. The "Ady" Storage Batteries Co. Charging & storage of batteries

Jewish factories in Palestine on Plain of Sharon & along the coast to ...

Title and date from: photographer's logbook: Matson Registers, v. 1, [1934-1939]. Caption continues from catalog: Taken March 1939. Gift; Episcopal Home; 1978.

Jewish factories in Palestine on Plain of Sharon & along the coast to Haifa. Haifa. The "Ady" Storage Batteries Co. Plate filling & drying

Jewish factories in Palestine on Plain of Sharon & along the coast to ...

Public domain image of an industrial building, factory, structure, works, 19th-20th century industrial revolution, free to use, no copyright restrictions - Picryl description

General store sells everything from batteries to bananas. Lamoille, Iowa

General store sells everything from batteries to bananas. Lamoille, Io...

Picryl description: Public domain image of a grocery or convenience store, food, 1930s, mid-20th-century United States, free to use, no copyright restrictions.

Jewish factories in Palestine on Plain of Sharon & along the coast to Haifa. Haifa. The "Ady" Storage Batteries Co. Testing of acumulators

Jewish factories in Palestine on Plain of Sharon & along the coast to ...

Public domain photograph of laboratory, scientist, free to use, no copyright restrictions image - Picryl description

Jewish factories in Palestine on Plain of Sharon & along the coast to Haifa. Haifa. The "Ady" Storage Batteries Co. The smelting pot. Plates & parts are east from composition metal

Jewish factories in Palestine on Plain of Sharon & along the coast to ...

Picryl description: Public domain photograph of a machine, worker, factory, industrial equipment, free to use, no copyright restrictions.

L'escadre françoise entrant dans Newport sous le feu des batteries et forcant le passage le 8 Aoust 1778

L'escadre françoise entrant dans Newport sous le feu des batteries et ...

Photograph shows the French fleet, under the command of Comte d'Estaing, approaching Newport, Rhode Island in an effort to engage the British fleet, August 8, 1778; shows several British ships burning in the ba... More

A black and white photo of a bunch of shoes. Great Depression Era, New Mexico

A black and white photo of a bunch of shoes. Great Depression Era, New...

Picryl description: Public domain photograph of coal miners, workers, 1930s, Great Depression, economic conditions, free to use, no copyright restrictions.

Mr. Keele filling the batteries in one of the two Delco systems in Pie Town, New Mexico

Mr. Keele filling the batteries in one of the two Delco systems in Pie...

Public domain photograph of a machine part, motor, equipment, free to use, no copyright restrictions image - Picryl description

A black and white photo of a bunch of shoes. Great Depression Era, New Mexico

A black and white photo of a bunch of shoes. Great Depression Era, New...

Picryl description: Public domain photograph of coal miners, workers, 1930s, Great Depression, economic conditions, free to use, no copyright restrictions.

Workman checking miners' lights. Batteries of these lights are checked every day. Mogollon, New Mexico

Workman checking miners' lights. Batteries of these lights are checked...

Picryl description: Public domain image of a worker, labor, factory, plant, manufacture, industrial facility, 1930s, mid-20th-century industrial photo, free to use, no copyright restrictions.

Automobile batteries furnish power storage for thirty-two volt wind charger. Savoy Mountains, Massachusetts

Automobile batteries furnish power storage for thirty-two volt wind ch...

Public domain photograph of 1930s America, free to use, no copyright restrictions image - Picryl description

Batteries for the halftrac scout cars being made at a large Midwest truck plant must have no defects. They won't have after the inspectors have checked their performance. White Motor Company, Cleveland, Ohio

Batteries for the halftrac scout cars being made at a large Midwest tr...

Public domain photograph - historical image of Ohio, United States, free to use, no copyright restrictions image - Picryl description

Automobile batteries furnish power storage for thirty-two volt wind charger. Savoy Mountains, Massachusetts

Automobile batteries furnish power storage for thirty-two volt wind ch...

Picryl description: Public domain image of a worker, labor, factory, plant, manufacture, industrial facility, 1930s, mid-20th-century industrial photo, free to use, no copyright restrictions.

The mill room. Measured batches are delivered to these tire workers, who worked in a room full of batteries of rolling mills. Here, by a rolling process, the rubber is squeezed, pulled, pounded and mixed with the other ingredients until all are blended into a "treated rubber" stock. Firestone (General Tires), Akron, Ohio

The mill room. Measured batches are delivered to these tire workers, w...

Public domain image of an industrial building, factory, structure, works, 19th-20th century industrial revolution, free to use, no copyright restrictions - Picryl description

Anaconda smelter, Montana. Anaconda Copper Mining Compnay. Batteries of converters. Degree of processing in the converters is determined by the color of the smoke

Anaconda smelter, Montana. Anaconda Copper Mining Compnay. Batteries o...

Public domain image of an industrial building, factory, structure, works, 19th-20th century industrial revolution, free to use, no copyright restrictions - Picryl description

Fiberglass manufacture, Owens-Corning, Toledo, Ohio. Wafer-thin sheets of bonded glass fiber are cut to size, inspected and packaged by workers like these in a plant of Owens-Corning Fiberglass Corporation. They are retainer mats being supplied under Army and Navy specifications for storage batteries in submarines, tanks, and rough-riding reconnaisance cars

Fiberglass manufacture, Owens-Corning, Toledo, Ohio. Wafer-thin sheets...

Public domain photograph of 1930s America, free to use, no copyright restrictions image - Picryl description

Fort Story coast defense. Target practice at Fort Story, Virginia. This soldier analyzes hits and misses at the control post of one of Uncle Sam's coast artillery batteries..

Fort Story coast defense. Target practice at Fort Story, Virginia. Thi...

Public domain image of a military portrait, uniform, armed forces, free to use, no copyright restrictions - Picryl description

Washington, D.C. Scrap salvage campaign, Victory Program. Storage batteries, with valuable rubber casing are among the objects in warehouse of wholesale junk dealer

Washington, D.C. Scrap salvage campaign, Victory Program. Storage batt...

Picryl description: Public domain image of a damaged, burned, or destroyed building, natural disaster, war destruction, ruins, 19th-century architecture, free to use, no copyright restrictions.

Fort Myer, Virginia. A sergeant at Fort Myer, Virginia demonstrates a "walkie-talkie" in the field. This is the latest and most compact two-way radio in use by the Army. The unit is complete, containing batteries, mechanism, and aerial which telescopes into the case when not in use for this instrument

Fort Myer, Virginia. A sergeant at Fort Myer, Virginia demonstrates a ...

Picryl description: Public domain image of military training, armed forces fort, camp, exercise activity, free to use, no copyright restrictions.

Fiberglass manufacture, Owens-Corning, Toledo, Ohio. Pretty worker in a paint shop of the Owens-Corning Fiberglass Corporation is cutting wafer-thin bonded mats of glass fiber for use as retainer mats in storage batteries supplied under Army and Navy specifications for storage batteries in submarines, tanks, and rough-riding reconnaisance cars

Fiberglass manufacture, Owens-Corning, Toledo, Ohio. Pretty worker in ...

Public domain photograph of 1930s industry, war production in the United States free to use, no copyright restrictions image - Picryl description

Production. War housing trailers. Electrical wiring is installed in war housing trailers being produced at Los Angeles by Western Trailer Company. Six-volt batteries for clearance lights, stop lights, tail lights and porch light are run inside the wall space. 110-volt wiring is run under molding to provide easy access and to comply with local wiring regulations in various parts of the country

Production. War housing trailers. Electrical wiring is installed in wa...

Public domain photograph of California in 1930s, free to use, no copyright restrictions image - Picryl description

Machine that thinks. Turning and boring a quadrant bracket on one of the batteries of machines at a large Army arsenal working full speed for the war program

Machine that thinks. Turning and boring a quadrant bracket on one of t...

Picryl description: Public domain image of an industrial building, factory, workshop, workers, 20th century, free to use, no copyright restrictions.

Fiberglass manufacture, Owens-Corning, Toledo, Ohio. "This is ain't no time to bunt." And this workman at a plant of Owens-Corning Fiberglass Corporation is batting out a hit by speeding carefully inspected packs of fiberglass retainer mats to the shipping department. These are supplied under Army and Navy specifications for storage batteries, to be used in submarines, tanks, and rough-riding reconnaisance cars

Fiberglass manufacture, Owens-Corning, Toledo, Ohio. "This is ain't no...

Public domain photograph of 1930s working-class Americans, free to use, no copyright restrictions image - Picryl description

Anaconda smelter, Montana. Anaconda Copper Mining Company. Batteries of flotation machines where the ore is finally concentrated before smelting

Anaconda smelter, Montana. Anaconda Copper Mining Company. Batteries o...

Picryl description: Public domain photo of an industrial building, factory or warehouse, free to use, no copyright restrictions image.

Anaconda smelter, Montana. Anaconda Copper Mining Company. Batteries of Hardinge ballmills reduce ore to the fineness of flour

Anaconda smelter, Montana. Anaconda Copper Mining Company. Batteries o...

Public domain image of an industrial building, factory, structure, works, 19th-20th century industrial revolution, free to use, no copyright restrictions - Picryl description

Anaconda smelter, Montana. Anaconda Copper Mining Company. Batteries of Hardinge ballmills in which the ore is reduced to the fineness of flour for the flotation process which immediately follows

Anaconda smelter, Montana. Anaconda Copper Mining Company. Batteries o...

Public domain image of an industrial building, factory, structure, works, 19th-20th century industrial revolution, free to use, no copyright restrictions - Picryl description

Anaconda smelter, Montana. Anaconda Copper Mining Company. Batteries of converters. Degree of processing in the converters is determined by the color of the smoke

Anaconda smelter, Montana. Anaconda Copper Mining Company. Batteries o...

Public domain image of an industrial building, factory, structure, works, 19th-20th century industrial revolution, free to use, no copyright restrictions - Picryl description

Battery of machines to arm batteries of guns. Both ends of the 75 mm shells are worked at once on these multiple spindle machines in a large eastern arsenal

Battery of machines to arm batteries of guns. Both ends of the 75 mm s...

Public domain image of an industrial building, factory, structure, works, 19th-20th century industrial revolution, free to use, no copyright restrictions - Picryl description

Linear accelerator beam meter showing batteries. Photograph taken July 29, 1948. LINAC-566

Linear accelerator beam meter showing batteries. Photograph taken July...

Digital Preservation File Name and Format: 434-LB-5-XBD201209-01060.TIF Photographs Documenting Scientists, Special Events, and Nuclear Research Facilities, Instruments, and Projects at the Berkeley Lab

16 inch gun, Battery Townsley, 1948

16 inch gun, Battery Townsley, 1948

16-inch gun and radar at Battery Townsley, Fort Cronkhite. c1948.

KENNEDY SPACE CENTER, FLA. - The STS-115 crew members stride out of the Operations and Checkout Building eager to get to Launch Pad 39B and the start of their mission to the International Space Station. This is the second attempt at launch after a week's postponement due to weather and technical concerns. On the left side, front to back, are Pilot Christopher Ferguson and Mission Specialists Steven MacLean and Heidemarie Stefanyshyn-Piper. On the right side, front to back, are Commander Brent Jett and Mission Specialists Daniel Burbank and Joseph Tanner. On its second attempt for launch, Atlantis is scheduled to lift off at 11:41 a.m. EDT today from Launch Pad 39B. During the STS-115 mission, Atlantis' astronauts will deliver and install the 17.5-ton, bus-sized P3/P4 integrated truss segment on the station. The girder-like truss includes a set of giant solar arrays, batteries and associated electronics and will provide one-fourth of the total power-generation capability for the completed station. This mission is the 116th space shuttle flight, the 27th flight for orbiter Atlantis, and the 19th U.S. flight to the ISS. STS-115 is scheduled to last 11 days with a planned landing at KSC. Photo credit: NASA/Kim Shiflett KSC-06pd2088

KENNEDY SPACE CENTER, FLA. - The STS-115 crew members stride out of ...

KENNEDY SPACE CENTER, FLA. - The STS-115 crew members stride out of the Operations and Checkout Building eager to get to Launch Pad 39B and the start of their mission to the International Space Station. This ... More

KENNEDY SPACE CENTER, FLA. - Huge clouds roll over Launch Pad 39B where Space Shuttle Atlantis still sits after the scrub of its launch on mission STS-115. Atlantis was originally scheduled to launch at 12:29 p.m. EDT on this date, but a 24-hour scrub was called by mission managers due to a concern with fuel cell 1. Towering above the shuttle is the 80-foot lightning mast. At left is the rolled-back rotating service structure with the payload changeout room open. Just above the orange external tank is the vent hood (known as the "beanie cap") at the end of the gaseous oxygen vent arm. Vapors are created as the liquid oxygen in the external tank boil off. The hood vents the gaseous oxygen vapors away from the space shuttle vehicle. During the STS-115 mission, Atlantis' astronauts will deliver and install the 17.5-ton, bus-sized P3/P4 integrated truss segment on the station. The girder-like truss includes a set of giant solar arrays, batteries and associated electronics and will provide one-fourth of the total power-generation capability for the completed station. This mission is the 116th space shuttle flight, the 27th flight for orbiter Atlantis, and the 19th U.S. flight to the International Space Station. STS-115 is scheduled to last 11 days with a planned landing at KSC. Photo credit: NASA/Ken Thornsley KSC-06pd2055

KENNEDY SPACE CENTER, FLA. - Huge clouds roll over Launch Pad 39B w...

KENNEDY SPACE CENTER, FLA. - Huge clouds roll over Launch Pad 39B where Space Shuttle Atlantis still sits after the scrub of its launch on mission STS-115. Atlantis was originally scheduled to launch at 12:... More

KENNEDY SPACE CENTER, FLA. -- At Launch Complex 39, members of the STS-117 crew are instructed in the operation of an M-113 armored personnel carrier by the astronaut rescue team. The astronauts on the STS-117 crew are participating in M-113 armored personnel carrier training during Terminal Countdown Demonstration Test (TCDT) activities, a dress rehearsal for their launch, targeted for March 15. The M-113 could be used to move the crew away from the launch pad quickly in the event of an emergency. The TCDT also includes pad emergency egress training and a simulated launch countdown. The mission payload aboard Space Shuttle Atlantis is the S3/S4 integrated truss structure, along with a third set of solar arrays and batteries. The crew of six astronauts will install the truss to continue assembly of the station. Photo credit: NASA/Kim Shiflett KSC-07pd0477

KENNEDY SPACE CENTER, FLA. -- At Launch Complex 39, members of the STS...

KENNEDY SPACE CENTER, FLA. -- At Launch Complex 39, members of the STS-117 crew are instructed in the operation of an M-113 armored personnel carrier by the astronaut rescue team. The astronauts on the STS-117 ... More

CAPE CANAVERAL, Fla. - In Orbiter Processing Facility 1 at NASA's Kennedy Space Center in Florida, United Space Alliance technicians, lying on a work platform, remove window #8 from the top of the crew module of space shuttle Atlantis. Inspection and maintenance of the crew module windows is standard procedure between shuttle missions. Atlantis is next slated to deliver an Integrated Cargo Carrier and Russian-built Mini Research Module to the International Space Station on the STS-132 mission. The second in a series of new pressurized components for Russia, the module will be permanently attached to the Zarya module. Three spacewalks are planned to store spare components outside the station, including six spare batteries, a boom assembly for the Ku-band antenna and spares for the Canadian Dextre robotic arm extension. A radiator, airlock and European robotic arm for the Russian Multi-purpose Laboratory Module also are payloads on the flight. Launch is targeted for May 14. Photo credit: NASA/Glenn Benson KSC-2010-1082

CAPE CANAVERAL, Fla. - In Orbiter Processing Facility 1 at NASA's Kenn...

CAPE CANAVERAL, Fla. - In Orbiter Processing Facility 1 at NASA's Kennedy Space Center in Florida, United Space Alliance technicians, lying on a work platform, remove window #8 from the top of the crew module o... More

KENNEDY SPACE CENTER, FLA. - The morning sky lightens behind Space Shuttle Atlantis while lights on the fixed service structure (FSS) still illuminate the orbiter on Launch Pad 39B. Atlantis was originally scheduled to launch at 12:29 p.m. EDT on this date, but a 24-hour scrub was called by mission managers due to a concern with Fuel Cell 1. Seen poised above the orange external tank is the vent hood (known as the "beanie cap") at the end of the gaseous oxygen vent arm. Vapors are created as the liquid oxygen in the external tank boil off. The hood vents the gaseous oxygen vapors away from the space shuttle vehicle. Extending from the FSS to Atlantis is the orbiter access arm with the White Room at the end. The White Room provides entry into the orbiter through the hatch. During the STS-115 mission, Atlantis' astronauts will deliver and install the 17.5-ton, bus-sized P3/P4 integrated truss segment on the station. The girder-like truss includes a set of giant solar arrays, batteries and associated electronics and will provide one-fourth of the total power-generation capability for the completed station. This mission is the 116th space shuttle flight, the 27th flight for orbiter Atlantis, and the 19th U.S. flight to the International Space Station. STS-115 is scheduled to last 11 days with a planned landing at KSC. Photo credit: NASA/Troy Cryder KSC-06pd2050

KENNEDY SPACE CENTER, FLA. - The morning sky lightens behind Space ...

KENNEDY SPACE CENTER, FLA. - The morning sky lightens behind Space Shuttle Atlantis while lights on the fixed service structure (FSS) still illuminate the orbiter on Launch Pad 39B. Atlantis was originally s... More

KENNEDY SPACE CENTER, FLA. - The rotating service structure (left) on Launch Pad 39B is rolled back to reveal Space Shuttle Atlantis. The RSS provides protected access to the orbiter for changeout and servicing of payloads at the pad and then is rolled away before liftoff. Atlantis is scheduled to launch Sept. 6 at 12:29 p.m. EDT on mission STS-115. During the mission, Atlantis' astronauts will deliver and install the 17.5-ton, bus-sized P3/P4 integrated truss segment on the station. The girder-like truss includes a set of giant solar arrays, batteries and associated electronics and will provide one-fourth of the total power-generation capability for the completed station. This mission is the 116th space shuttle flight, the 27th flight for orbiter Atlantis, and the 19th U.S. flight to the International Space Station. STS-115 is scheduled to last 11 days with a planned KSC landing at about 8:03 a.m. EDT on Sept. 17. Photo credit: NASA/George Shelton KSC-06pd2039

KENNEDY SPACE CENTER, FLA. - The rotating service structure (left) o...

KENNEDY SPACE CENTER, FLA. - The rotating service structure (left) on Launch Pad 39B is rolled back to reveal Space Shuttle Atlantis. The RSS provides protected access to the orbiter for changeout and servi... More

KENNEDY SPACE CENTER, FLA. -- Space Shuttle Atlantis passes the turn basin as it slowly wends its way toward Launch Pad 39A. First motion out of the Vehicle Assembly Building was at 8:19 a.m. The 3.4-mile trip to the pad along the crawlerway will take about 6 hours. The mission payload aboard Space Shuttle Atlantis is the S3/S4 integrated truss structure, along with a third set of solar arrays and batteries. The crew of six astronauts will install the truss to continue assembly of the International Space Station. Launch is targeted for March 15. Photo credit: NASA/Ken Thornsley KSC-07pd0390

KENNEDY SPACE CENTER, FLA. -- Space Shuttle Atlantis passes the turn b...

KENNEDY SPACE CENTER, FLA. -- Space Shuttle Atlantis passes the turn basin as it slowly wends its way toward Launch Pad 39A. First motion out of the Vehicle Assembly Building was at 8:19 a.m. The 3.4-mile tri... More

KENNEDY SPACE CENTER, FLA. -- In the Launch Pad 39A area, Mission STS-117 crew members receive instruction on emergency egress using the slidewire basket system during Terminal Countdown Demonstration Test activities. Here, Mission Specialists Steven Swanson (left) and Danny Olivas (right) practice exiting from the slidewire basket. The TCDT also includes M-113 armored personnel carrier training, and a simulated launch countdown. The mission payload aboard Space Shuttle Atlantis is the S3/S4 integrated truss structure, along with a third set of solar arrays and batteries. The crew of six astronauts will install the truss to continue assembly of the International Space Station. Photo credit: NASA/Kim Shiflett KSC-07pd0494

KENNEDY SPACE CENTER, FLA. -- In the Launch Pad 39A area, Mission STS...

KENNEDY SPACE CENTER, FLA. -- In the Launch Pad 39A area, Mission STS-117 crew members receive instruction on emergency egress using the slidewire basket system during Terminal Countdown Demonstration Test act... More

KENNEDY SPACE CENTER, FLA. - During suitup in the Operations and Checkout Building at NASA Kennedy Space Center, STS-115 Mission Specialist Daniel Burbank tests the communication system in his helmet. Burbank is making his second shuttle flight on this mission to the International Space Station aboard Space Shuttle Atlantis. On its second attempt for launch, Atlantis is scheduled to lift off at 11:41 a.m. EDT today from Launch Pad 39B. During the STS-115 mission, Atlantis' astronauts will deliver and install the 17.5-ton, bus-sized P3/P4 integrated truss segment on the station. The girder-like truss includes a set of giant solar arrays, batteries and associated electronics and will provide one-fourth of the total power-generation capability for the completed station. This mission is the 116th space shuttle flight, the 27th flight for orbiter Atlantis, and the 19th U.S. flight to the ISS. STS-115 is scheduled to last 11 days with a planned landing at KSC. Photo credit: NASA/Kim Shiflett KSC-06pd2086

KENNEDY SPACE CENTER, FLA. - During suitup in the Operations and Che...

KENNEDY SPACE CENTER, FLA. - During suitup in the Operations and Checkout Building at NASA Kennedy Space Center, STS-115 Mission Specialist Daniel Burbank tests the communication system in his helmet. Burban... More

KENNEDY SPACE CENTER, FLA. -- The STS-117 crew arrives at NASA's Kennedy Space Center to take part in the Terminal Countdown Demonstration Test (TCDT), a preparation for the launch March 15 to the International Space Station. NASA Launch Director Mike Leinbach greets Mission Specialist Steven Swanson at the Shuttle Landing Facility. The TCDT includes emergency egress training and a simulated launch countdown. The mission payload aboard Space Shuttle Atlantis is the S3/S4 integrated truss structure, along with a third set of solar arrays and batteries. The crew of six astronauts will install the truss to continue assembly of the station. Photo credit: NASA/Kim Shiflett KSC-07pd0457

KENNEDY SPACE CENTER, FLA. -- The STS-117 crew arrives at NASA's Kenne...

KENNEDY SPACE CENTER, FLA. -- The STS-117 crew arrives at NASA's Kennedy Space Center to take part in the Terminal Countdown Demonstration Test (TCDT), a preparation for the launch March 15 to the International... More

CAPE CANAVERAL, Fla. - At the Shuttle Landing Facility at NASA's Kennedy Space Center in Florida, workers prepare to roll the transportation case protecting the Russian-built Mini Research Module1, or MRM1, from the cargo bay of a Volga-Dnepr Antonov AN-124-100, a Ukranian/Russian aircraft. The second in a series of new pressurized components for Russia, the module, named Rassvet, will be permanently attached to the International Space Station's Zarya module on space shuttle Atlantis' STS-132 mission. An Integrated Cargo Carrier will join the MRM in Atlantis' payload bay. Three spacewalks are planned to store spare components outside the station, including six spare batteries, a boom assembly for the Ku-band antenna and spares for the Canadian Dextre robotic arm extension. A radiator, airlock, and European robotic arm for the Russian Multi-purpose Laboratory Module also will be delivered to the station. Launch is targeted for May 14, 2010. Photo credit: NASA/Jack Pfaller KSC-2009-6857

CAPE CANAVERAL, Fla. - At the Shuttle Landing Facility at NASA's Kenne...

CAPE CANAVERAL, Fla. - At the Shuttle Landing Facility at NASA's Kennedy Space Center in Florida, workers prepare to roll the transportation case protecting the Russian-built Mini Research Module1, or MRM1, fro... More

CAPE CANAVERAL, Fla. - In Orbiter Processing Facility 1 at NASA's Kennedy Space Center in Florida, United Space Alliance technicians roll the test equipment away from an external tank door on space shuttle Atlantis following the successful completion of a push test. Two umbilical doors, located on the shuttle's aft fuselage, close after external tank separation following launch. The test confirms that the door's actuators are functioning properly and that signals sent from the actuators correctly indicate that the doors have closed, creating the necessary thermal barrier for reentry. Atlantis is next slated to deliver an Integrated Cargo Carrier and Russian-built Mini Research Module to the International Space Station on the STS-132 mission. The second in a series of new pressurized components for Russia, the module will be permanently attached to the Zarya module. Three spacewalks are planned to store spare components outside the station, including six spare batteries, a boom assembly for the Ku-band antenna and spares for the Canadian Dextre robotic arm extension. A radiator, airlock and European robotic arm for the Russian Multi-purpose Laboratory Module also are payloads on the flight. Launch is targeted for May 14, 2010. Photo credit: NASA/Troy Cryder KSC-2010-1076

CAPE CANAVERAL, Fla. - In Orbiter Processing Facility 1 at NASA's Kenn...

CAPE CANAVERAL, Fla. - In Orbiter Processing Facility 1 at NASA's Kennedy Space Center in Florida, United Space Alliance technicians roll the test equipment away from an external tank door on space shuttle Atla... More

CAPE CANAVERAL, Fla. – Inside a test cell in the Vehicle Assembly Building at NASA's Kennedy Space Center, a portion of Atlantis’ external tank is sealed to prevent contamination so that technicians can replace a valve after small dings were found on the sealing surface of the quick disconnect system that handles liquid-hydrogen fuel for the shuttle’s three main engines. The tank will be attached to the twin solid rocket boosters on Aug. 3 for the STS-125 mission, the fifth and final shuttle servicing mission to NASA’s Hubble Space Telescope. During the mission, the crew will install new instruments on the telescope, including the Cosmic Origins Spectrograph and the Wide Field Camera 3. A refurbished Fine Guidance Sensor will replace one unit of three now onboard. Mission specialists will also install new gyroscopes, batteries and thermal blankets on the telescope. Launch is targeted for Oct. 8. Photo credit: NASA/Jim Grossmann KSC-08pd2152

CAPE CANAVERAL, Fla. – Inside a test cell in the Vehicle Assembly Buil...

CAPE CANAVERAL, Fla. – Inside a test cell in the Vehicle Assembly Building at NASA's Kennedy Space Center, a portion of Atlantis’ external tank is sealed to prevent contamination so that technicians can replace... More

CAPE CANAVERAL, Fla. - In Orbiter Processing Facility 1 at NASA's Kennedy Space Center in Florida, preparations are under way to install the chin panel on space shuttle Atlantis. The chin panel is a semicircular-shaped section of reinforced carbon-carbon that fits under the shuttle's nose cap and is part of its thermal protection system. Atlantis is next slated to deliver an Integrated Cargo Carrier and Russian-built Mini Research Module to the International Space Station on the STS-132 mission. The second in a series of new pressurized components for Russia, the module will be permanently attached to the Zarya module. Three spacewalks are planned to store spare components outside the station, including six spare batteries, a boom assembly for the Ku-band antenna and spares for the Canadian Dextre robotic arm extension. A radiator, airlock and European robotic arm for the Russian Multi-purpose Laboratory Module also are payloads on the flight. Launch is targeted for May 14, 2010. Photo credit: NASA/Troy Cryder KSC-2010-1243

CAPE CANAVERAL, Fla. - In Orbiter Processing Facility 1 at NASA's Kenn...

CAPE CANAVERAL, Fla. - In Orbiter Processing Facility 1 at NASA's Kennedy Space Center in Florida, preparations are under way to install the chin panel on space shuttle Atlantis. The chin panel is a semicirc... More

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility at NASA's Kennedy Space Center, workers check the starboard integrated truss, known as S6, after its full rotation. The truss was rotated in order to remove and replace lower deck batteries. The final starboard truss in the assembly of the International Space Station, the S6 is scheduled to fly on the STS-119 space shuttle mission, whose launch date is not yet determined. Photo credit: NASA/Kim Shiflett KSC-08pd0160

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility...

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility at NASA's Kennedy Space Center, workers check the starboard integrated truss, known as S6, after its full rotation. The truss was rotated ... More

KENNEDY SPACE CENTER, FLA. - Twin columns of fire propel Space Shuttle Atlantis into a clear blue sky after liftoff from Launch Pad 39B. Atlantis is heading for a rendezvous with the International Space Station on mission STS-115. Liftoff was on-time at 11:14:55 a.m. EDT. After several launch attempts were scrubbed due to weather and technical concerns, this launch was executed perfectly. Mission STS-115 is the 116th space shuttle flight, the 27th flight for orbiter Atlantis, and the 19th U.S. flight to the International Space Station. During the mission, Atlantis' astronauts will deliver and install the 17.5-ton, bus-sized P3/P4 integrated truss segment on the station. The girder-like truss includes a set of giant solar arrays, batteries and associated electronics and will provide one-fourth of the total power-generation capability for the completed station. STS-115 is scheduled to last 11 days with a planned landing at KSC KSC-06pp2149

KENNEDY SPACE CENTER, FLA. - Twin columns of fire propel Space Shutt...

KENNEDY SPACE CENTER, FLA. - Twin columns of fire propel Space Shuttle Atlantis into a clear blue sky after liftoff from Launch Pad 39B. Atlantis is heading for a rendezvous with the International Space Stat... More

KENNEDY SPACE CENTER, FLA. - Huge clouds billow on the horizon behind Space Shuttle Atlantis still sitting on Launch Pad 39B after the scrub of its launch on mission STS-115. Atlantis was originally scheduled to launch at 12:29 p.m. EDT on this date, but a 24-hour scrub was called by mission managers due to a concern with fuel cell 1. Towering above the shuttle is the 80-foot lightning mast. At left is the rolled-back rotating service structure with the payload changeout room open. During the STS-115 mission, Atlantis' astronauts will deliver and install the 17.5-ton, bus-sized P3/P4 integrated truss segment on the station. The girder-like truss includes a set of giant solar arrays, batteries and associated electronics and will provide one-fourth of the total power-generation capability for the completed station. This mission is the 116th space shuttle flight, the 27th flight for orbiter Atlantis, and the 19th U.S. flight to the International Space Station. STS-115 is scheduled to last 11 days with a planned landing at KSC. Photo credit: NASA/Ken Thornsley KSC-06pd2056

KENNEDY SPACE CENTER, FLA. - Huge clouds billow on the horizon behin...

KENNEDY SPACE CENTER, FLA. - Huge clouds billow on the horizon behind Space Shuttle Atlantis still sitting on Launch Pad 39B after the scrub of its launch on mission STS-115. Atlantis was originally scheduled... More

KENNEDY SPACE CENTER, FLA. - Flaming rockets propel Space Shuttle Atlantis off Launch Pad 39B for a rendezvous with the International Space Station on mission STS-115. In the background is the Atlantic Ocean. Appearing above the nose of the orbiter is the end of the gaseous vent line that leads from the hood, or beanie cap, which has been moved away from the shuttle for liftoff. Liftoff was on-time at 11:14:55 a.m. EDT. After several launch attempts were scrubbed due to weather and technical concerns, this launch was executed perfectly. Mission STS-115 is the 116th space shuttle flight, the 27th flight for orbiter Atlantis, and the 19th U.S. flight to the International Space Station. During the mission, Atlantis' astronauts will deliver and install the 17.5-ton, bus-sized P3/P4 integrated truss segment on the station. The girder-like truss includes a set of giant solar arrays, batteries and associated electronics and will provide one-fourth of the total power-generation capability for the completed station. STS-115 is scheduled to last 11 days with a planned landing at KSC KSC-06pp2147

KENNEDY SPACE CENTER, FLA. - Flaming rockets propel Space Shuttle Atl...

KENNEDY SPACE CENTER, FLA. - Flaming rockets propel Space Shuttle Atlantis off Launch Pad 39B for a rendezvous with the International Space Station on mission STS-115. In the background is the Atlantic Ocean.... More

KENNEDY SPACE CENTER, FLA. -- Across the expanse of the turn basin, Space Shuttle Atlantis is seen as it creeps toward Launch Pad 39A. At left is the 525-foot-tall Vehicle Assembly Building. First motion was at 8:19 a.m. The 3.4-mile trip along the crawlerway will take about 6 hours. The mission payload aboard Space Shuttle Atlantis is the S3/S4 integrated truss structure, along with a third set of solar arrays and batteries. The crew of six astronauts will install the truss to continue assembly of the International Space Station. Launch is targeted for March 15. Photo credit: NASA/Kim Shiflett KSC-07pd0383

KENNEDY SPACE CENTER, FLA. -- Across the expanse of the turn basin, S...

KENNEDY SPACE CENTER, FLA. -- Across the expanse of the turn basin, Space Shuttle Atlantis is seen as it creeps toward Launch Pad 39A. At left is the 525-foot-tall Vehicle Assembly Building. First motion was ... More

KENNEDY SPACE CENTER, FLA. - Storm clouds gather behind Space Shuttle Atlantis on Launch Pad 39B. Atlantis was originally scheduled to launch on Aug. 27, but a scrub was called by mission managers due to a concern with fuel cell 1. Towering above the shuttle is the 80-foot lightning mast. During the STS-115 mission, Atlantis' astronauts will deliver and install the 17.5-ton, bus-sized P3/P4 integrated truss segment on the station. The girder-like truss includes a set of giant solar arrays, batteries and associated electronics and will provide one-fourth of the total power-generation capability for the completed station. This mission is the 116th space shuttle flight, the 27th flight for orbiter Atlantis, and the 19th U.S. flight to the International Space Station. STS-115 is scheduled to last 11 days with a planned landing at KSC. Photo credit: NASA/Ken Thornsley KSC-06pd2064

KENNEDY SPACE CENTER, FLA. - Storm clouds gather behind Space Shutt...

KENNEDY SPACE CENTER, FLA. - Storm clouds gather behind Space Shuttle Atlantis on Launch Pad 39B. Atlantis was originally scheduled to launch on Aug. 27, but a scrub was called by mission managers due to ... More

CAPE CANAVERAL, Fla. - Space shuttle Atlantis rumbles off Launch Pad 39A at NASA's Kennedy Space Center in Florida on the STS-132 mission to the International Space Station at 2:20 p.m. EDT on May 14. The Russian-built Mini Research Module-1 known as Rassvet, or "dawn," is inside the shuttle's cargo bay. It will provide additional storage space and a new docking port for Russian Soyuz and Progress spacecraft. The laboratory will be attached to the bottom port of the station's Zarya module. The mission's three spacewalks will focus on storing spare components outside the station, including six batteries, a communications antenna and parts for the Canadian Dextre robotic arm. STS-132 is the 132nd shuttle flight, the 32nd for Atlantis and the 34th shuttle mission dedicated to station assembly and maintenance. For more information on the STS-132 mission objectives, payload and crew, visit www.nasa.gov/mission_pages/shuttle/shuttlemissions/sts132/index.html. Photo Credit: NASA/Jack Pfaller KSC-20103367

CAPE CANAVERAL, Fla. - Space shuttle Atlantis rumbles off Launch Pad 3...

CAPE CANAVERAL, Fla. - Space shuttle Atlantis rumbles off Launch Pad 39A at NASA's Kennedy Space Center in Florida on the STS-132 mission to the International Space Station at 2:20 p.m. EDT on May 14. The ... More

KENNEDY SPACE CENTER, Fla. -- The plume of smoke grows behind Space Shuttle Discovery as it hurtles into space on mission STS-105. Liftoff occurred on time at 5:10:14 p.m. EDT. Besides the Shuttle crew of four, Discovery carries the Expedition Three crew who will replace Expedition Two on the International Space Station. The mission includes the third flight of an Italian-built Multi-Purpose Logistics Module delivering additional scientific racks, equipment and supplies for the Space Station, and two spacewalks. Part of the payload is the Early Ammonia Servicer (EAS) tank, which will be attached to the Station during the spacewalks. The EAS will be installed on the P6 truss, which holds the Station’s giant U.S. solar arrays, batteries and the cooling radiators. The EAS contains spare ammonia for the Station’s cooling system. The three-member Expedition Two crew will be returning to Earth aboard Discovery after a five-month stay on the Station KSC01padig267

KENNEDY SPACE CENTER, Fla. -- The plume of smoke grows behind Space Sh...

KENNEDY SPACE CENTER, Fla. -- The plume of smoke grows behind Space Shuttle Discovery as it hurtles into space on mission STS-105. Liftoff occurred on time at 5:10:14 p.m. EDT. Besides the Shuttle crew of four,... More

KENNEDY SPACE CENTER, FLA. - After rollback of the rotating service structure on Launch Pad 39B, Space Shuttle Atlantis shines in the late afternoon sun. The RSS provides protected access to the orbiter for changeout and servicing of payloads at the pad and then is rolled away before liftoff. At right is the 300,000-gallon water tank that releases a deluge of water across the mobile launcher platform during liftoff to aid sound suppression. Atlantis is scheduled to launch Sept. 6 at 12:29 p.m. EDT on mission STS-115. During the mission, Atlantis' astronauts will deliver and install the 17.5-ton, bus-sized P3/P4 integrated truss segment on the station. The girder-like truss includes a set of giant solar arrays, batteries and associated electronics and will provide one-fourth of the total power-generation capability for the completed station. This mission is the 116th space shuttle flight, the 27th flight for orbiter Atlantis, and the 19th U.S. flight to the International Space Station. STS-115 is scheduled to last 11 days with a planned KSC landing at about 8:03 a.m. EDT on Sept. 17. Photo credit: NASA/Ken Thornsley KSC-06pd2045

KENNEDY SPACE CENTER, FLA. - After rollback of the rotating service ...

KENNEDY SPACE CENTER, FLA. - After rollback of the rotating service structure on Launch Pad 39B, Space Shuttle Atlantis shines in the late afternoon sun. The RSS provides protected access to the orbiter for ... More

KENNEDY SPACE CENTER, FLA. - Twin columns of fire propel Space Shuttle Atlantis into a clear blue sky after liftoff from Launch Pad 39B. At left is the fixed service structure, topped by the lightning mast. Clouds of smoke and steam nearly obscure the pad. Atlantis is heading for a rendezvous with the International Space Station on mission STS-115. Liftoff was on-time at 11:14:55 a.m. EDT. After several launch attempts were scrubbed due to weather and technical concerns, this launch was executed perfectly. Mission STS-115 is the 116th space shuttle flight, the 27th flight for orbiter Atlantis, and the 19th U.S. flight to the International Space Station. During the mission, Atlantis' astronauts will deliver and install the 17.5-ton, bus-sized P3/P4 integrated truss segment on the station. The girder-like truss includes a set of giant solar arrays, batteries and associated electronics and will provide one-fourth of the total power-generation capability for the completed station. STS-115 is scheduled to last 11 days with a planned landing at KSC KSC-06pp2153

KENNEDY SPACE CENTER, FLA. - Twin columns of fire propel Space Shutt...

KENNEDY SPACE CENTER, FLA. - Twin columns of fire propel Space Shuttle Atlantis into a clear blue sky after liftoff from Launch Pad 39B. At left is the fixed service structure, topped by the lightning mast. ... More

Batttery warmer - NATICK soldier systems center, U.S. Army

Batttery warmer - NATICK soldier systems center, U.S. Army

Public domain photograph of military equipment, gear, free to use, no copyright restrictions image - Picryl description

CAPE CANAVERAL, Fla. - In Orbiter Processing Facility 1 at NASA's Kennedy Space Center in Florida, a United Space Alliance technician, lying on a work platform, works inside the crew module of space shuttle Atlantis following removal of window #8. Inspection and maintenance of the crew module windows is standard procedure between shuttle missions. Atlantis is next slated to deliver an Integrated Cargo Carrier and Russian-built Mini Research Module to the International Space Station on the STS-132 mission. The second in a series of new pressurized components for Russia, the module will be permanently attached to the Zarya module. Three spacewalks are planned to store spare components outside the station, including six spare batteries, a boom assembly for the Ku-band antenna and spares for the Canadian Dextre robotic arm extension. A radiator, airlock and European robotic arm for the Russian Multi-purpose Laboratory Module also are payloads on the flight. Launch is targeted for May 14. Photo credit: NASA/Glenn Benson KSC-2010-1083

CAPE CANAVERAL, Fla. - In Orbiter Processing Facility 1 at NASA's Kenn...

CAPE CANAVERAL, Fla. - In Orbiter Processing Facility 1 at NASA's Kennedy Space Center in Florida, a United Space Alliance technician, lying on a work platform, works inside the crew module of space shuttle Atl... More

Batttery warmer - NATICK soldier systems center, U.S. Army

Batttery warmer - NATICK soldier systems center, U.S. Army

Public domain photograph of military equipment, gear, free to use, no copyright restrictions image - Picryl description

Rangers taking pictures, Battery Wallace, 1971

Rangers taking pictures, Battery Wallace, 1971

Rangers taking pictures of Battery Elmer Wallace, casement #2, Fort Barry, 1971.

NICAD NICKEL CADMIUM BATTERIES - FAILED BATTERY AND GOOD BATTERY

NICAD NICKEL CADMIUM BATTERIES - FAILED BATTERY AND GOOD BATTERY

The original finding aid described this as: Capture Date: 6/21/1974 Photographer: MARTIN BROWN Keywords: Larsen Scan Photographs Relating to Agency Activities, Facilities and Personnel

ELECTRIC VEHICLE PROJECT OFFICE - ELECTRIC VEHICLE BATTERIES

ELECTRIC VEHICLE PROJECT OFFICE - ELECTRIC VEHICLE BATTERIES

The original finding aid described this as: Capture Date: 10/1/1975 Photographer: MARTIN BROWN Keywords: Larsen Scan Photographs Relating to Agency Activities, Facilities and Personnel

KENNEDY SPACE CENTER, FLA. -- The Integrated Equipment Assembly (IEA), one of two major components of the Starboard 6 (S6) truss segment for the International Space Station (ISS), arrives at the Shuttle Landing Facility aboard NASA's Super Guppy cargo airplane. The customized four-engine aricraft has a 24-foot-diameter fuselage and a foldaway nose enabling it to load and transport oversize cargo. The IEA will be joined to its companion piece, the Long Spacer, before launch early in 2004. The S6 truss segment will be the 11th and final piece of the Station's Integrated Truss Structure and will support the fourth and final set of solar arrays, batteries, and electronics. KSC-02pd1905

KENNEDY SPACE CENTER, FLA. -- The Integrated Equipment Assembly (IEA),...

KENNEDY SPACE CENTER, FLA. -- The Integrated Equipment Assembly (IEA), one of two major components of the Starboard 6 (S6) truss segment for the International Space Station (ISS), arrives at the Shuttle Landing... More

ELECTRIC VEHICLE PROJECT OFFICE - ELECTRIC VEHICLE BATTERIES

ELECTRIC VEHICLE PROJECT OFFICE - ELECTRIC VEHICLE BATTERIES

The original finding aid described this as: Capture Date: 10/1/1975 Photographer: MARTIN BROWN Keywords: Larsen Scan Photographs Relating to Agency Activities, Facilities and Personnel

ELECTRIC VEHICLE PROJECT OFFICE - ELECTRIC VEHICLE BATTERIES

ELECTRIC VEHICLE PROJECT OFFICE - ELECTRIC VEHICLE BATTERIES

The original finding aid described this as: Capture Date: 10/1/1975 Photographer: MARTIN BROWN Keywords: Larsen Scan Photographs Relating to Agency Activities, Facilities and Personnel

Battery Elmer Wallace, Fort Barry, 1975

Battery Elmer Wallace, Fort Barry, 1975

Battery Elmer Wallace, Fort Barry, 1975.

KENNEDY SPACE CENTER, FLA. -- The Integrated Equipment Assembly (IEA), one of two major components of the Starboard 6 (S6) truss segment for the International Space Station (ISS), is revealed inside NASA's Super Guppy cargo airplane following its arrival at the Shuttle Landing Facility. The customized four-engine aricraft has a 24-foot-diameter fuselage and a foldaway nose enabling it to load and transport oversize cargo. The IEA will be joined to its companion piece, the Long Spacer, before launch early in 2004. The S6 truss segment will be the 11th and final piece of the Station's Integrated Truss Structure and will support the fourth and final set of solar arrays, batteries, and electronics. KSC-02pd1908

KENNEDY SPACE CENTER, FLA. -- The Integrated Equipment Assembly (IEA),...

KENNEDY SPACE CENTER, FLA. -- The Integrated Equipment Assembly (IEA), one of two major components of the Starboard 6 (S6) truss segment for the International Space Station (ISS), is revealed inside NASA's Supe... More

NICKEL ZINC BATTERIES, NASA Technology Images

NICKEL ZINC BATTERIES, NASA Technology Images

The original finding aid described this as: Capture Date: 10/5/1976 Photographer: MARTIN BROWN Keywords: Larsen Scan Photographs Relating to Agency Activities, Facilities and Personnel

NICKEL ZINC BATTERIES, NASA Technology Images

NICKEL ZINC BATTERIES, NASA Technology Images

The original finding aid described this as: Capture Date: 10/5/1976 Photographer: MARTIN BROWN Keywords: Larsen Scan Photographs Relating to Agency Activities, Facilities and Personnel

NICKEL ZINC BATTERIES, NASA Technology Images

NICKEL ZINC BATTERIES, NASA Technology Images

The original finding aid described this as: Capture Date: 10/5/1976 Photographer: MARTIN BROWN Keywords: Larsen Scan Photographs Relating to Agency Activities, Facilities and Personnel

NICKEL ZINC BATTERIES, NASA Technology Images

NICKEL ZINC BATTERIES, NASA Technology Images

The original finding aid described this as: Capture Date: 10/5/1976 Photographer: MARTIN BROWN Keywords: Larsen Scan Photographs Relating to Agency Activities, Facilities and Personnel

NICKEL ZINC BATTERIES, NASA Technology Images

NICKEL ZINC BATTERIES, NASA Technology Images

The original finding aid described this as: Capture Date: 10/5/1976 Photographer: MARTIN BROWN Keywords: Larsen Scan Photographs Relating to Agency Activities, Facilities and Personnel

COMPOSITE OF FUEL CELL BATTERIES AND BATTERY SYSTEMS

COMPOSITE OF FUEL CELL BATTERIES AND BATTERY SYSTEMS

The original finding aid described this as: Capture Date: 1/6/1976 Photographer: Unknown Artist Keywords: Larsen Scan Photographs Relating to Agency Activities, Facilities and Personnel

NICKEL ZINC BATTERIES, NASA Technology Images

NICKEL ZINC BATTERIES, NASA Technology Images

The original finding aid described this as: Capture Date: 10/5/1976 Photographer: MARTIN BROWN Keywords: Larsen Scan Photographs Relating to Agency Activities, Facilities and Personnel

Previous

of 32

Next